14GT15
14GT20
FUNCTION OPERATION CHECKING (VIDEO AND AUDIO)
No. Adjusting pointAdjusting procedure/conditionsWaveform and others
1CONTRAST1. Receive "Monoscope Pattern" signal.
key2. Set P-Mode to select CONTRAST.
3. Press Volume Up/Down key to check whether the
CONTRAST effect is OK or not.
2COLOUR key1. Receive "Color Bar" signal.
2. Set P-Mode to select COLOUR.
3. Press Volume Up/Down key to check whether
the COLOUR effect is OK or not.
3BRIGHTNESS1. Receive "Monoscope Pattern" signal.
key2. Set P-Mode to select BRIGHTNESS.
3. Press Volume Up/Down key to check whether
the BRIGHTNESS effect is OK or not.
4TINT key1. Receive the "NTSC Colour Bar" signal thru AV in.
2. Set P-Mode to select TINT.
3. Press Volume Up/Down key to check TINT, UP
for GREEN direction and DOWN for PURPLE di-
rection whether is OK or not.
5SHARPNESS1. Receive "Monoscope Pattern" signal.
Key2. Set P-mode to select SHARPNESS.
3. Press Volume Up/Down key to check whether
the SHARPNESS effect is OK or not.
6CH DISPLAY1. All Ch (1~99) will have an OSD display of the
COLOURchannel number in green colour under AFT ON
condition.
7NORMAL Key1. Once in PICTURE Mode, and the NORMAL keyNotes:If nothing is display
is pressed, all the settings will be present to nor-mean contrast, colour, bright,
mal setting.tint, sharpness are all in nor-
(Normal setting value for every mode).mal setting.
E CONTRAST: MAX
E COLOUR: CENTER
E BRIGHTNESS : CENTER
E TINT: CENTER
E SHARPNESS: CENTER
8WHITE TEMP1. Receive "Monoscope Pattern" signal.
2. Set FUNCTION to select WHITE TEMP.
3. Press Volume Up/Down key to check WHITE
TEMP Option, STANDARD:
NORMAL SETTING, WARM for more REDDISH
direction changing, COOL for more BLUISH di-
rection changing.
17 |