Code
Function (Purpose)PurposeSectionItem
Main Sub
413Used to check the operation of Operation test/check OthersOperation
the document size sensor and
the related circuit. (The
document size sensor output
level can be monitored with the
LCD display.)
431Used to set the fusing SettingFixing (Fusing)Operation
temperature in each operation
mode.
441Used to set enable/disable of SettingProcess Operation
correction operations in the (Photoconductor,
image forming (process) developing, transfer,
section.cleaning)
2Black image density sensor AdjustmentOperation
adjustment
4Image forming section SettingProcess Picture quality
correction, image density (Photoconductor,
sensor adjustment conditions development, transfer)
setup
6Used to forcibly execute the Operation test/check Process Operation
image forming section (Photoconductor,
correction (high density process developing, transfer,
correction) (process correction).cleaning)
9Used to check the data related Adjustment/Setting/Process DataOperation data
to the image forming section Operation data (Photoconductor, (Machine
correction (the corrected main output, check developing, transfer, conditions)
charger grid voltage in each (display, print)cleaning)
print mode, the developing bias
voltage, etc.). (Used to check
that correction is performed
normally or not.)
12 Used to check the sampling Adjustment/Setting/Process DataOperation data
toner image patch density data Operation data (Photoconductor, (Machine
in the image forming section output, check developing, transfer, conditions)
correction (high-density (display, print)cleaning)
correction) (process correction).
This simulation allows to check
if the correction operation is
performed normally.)
13 Color image density sensor AdjustmentProcess (Transfer)
adjustment (Adjustment by the
adjustment jig)
14 Used to monitor the output level Adjustment/Setting/Others
of the fusing temperature Operation data
sensor, the machine output, check
temperature sensor, and the (display, print)
humidity sensor.
21 Used to store color balance SettingPicture quality
adjustment data. (Half tone
image correction initial setting)
(After execution of color
balance adjustment with SIM
46-21, this simulation must be
executed.)
22 Used to check each color toner Adjustment/Setting/Process DataOperation data
patch image density UITU in Operation data (Photoconductor, (Machine
half tone image forming section output, check developing, transfer, conditions)
correction (process correction). (display, print)cleaning)
(This simulation allows to check
if correction operation is
performed normally.)
AR-C260/C260M SIMULATION 9 - 8 |
ACEC
