1-6. Cleaning
1-6. Cleaning1-6-2. Cares After Using at Special
Environment
1-6-1. Cleaning of Viewfinder
It is recommended to check the following items after
By extracting VF tube sub assembly, lens and MC protec-gathering the news at seaside, dust area or spa.
tor can be easily cleaned. And also dust on the CRT
surface or mirror can be easily cleaned off.1. Clean off sand and other dust in the unit carefully.
2. Do not allow salt in seawater or sulfur in spa to contact
1. Turn the hold ring to the left and extract the VF tubea not-painted surface of the cabinet. They may cause to
sub assembly.corrode. Clean with alcohol immediately if contacted.
2. Detach the eyecup.3. Clean the connection surface of connectors.
3. Remove the MC protector with the filter holder.4. Carry out the common operation check and check that
4. Clean the lens and MC protector with a commerciallythe unit has not an abnormal sound or operation.
available camera lens cleaner. Blow off dust with a
blower carefully so as not to flaw the mirror.
5. After the cleaning is completed, install by reversing
the preceding steps. Align red lines of the VF tube and
VF tube sub assembly when inserting, and turn the
hold ring to the right until it locks.
m
. Do not use any type of solvent, such as alcohol, benzine
or thinner to remove stains.
. Be sure to attach the eyecup to the VF, or the MC
protector may come off.
. To protect the viewfinder lens from drops, put the MC
protector in the filter holder and attach the eyecup
securely.
Hold ringAlign red lines
MC protector
VF tube sub
assembly
Filter holder
Eyecup
BVF-10/10CE1-3 (E) |
ACEC
