8. MAX GAIN Adjustment9. Auto White Balance Standard Data Input
Setting the minimum illumination.SubjectClear chart
If it is not consistent, the image level required for taking subjects in(Color reproduction adjustment frame)
low illuminance will not be produced (dark).
Adjustment PageF
SubjectClear chart
Adjustment Address32 to 35
(Color reproduction adjustment frame)
Measurement PointDDS display of LCD or TV monitorNote 1:This adjustment should be carried out upon completion of O6. Color
Measuring Instrument (Note)Reproduction Adjustment�.
Note 2:Check that the data of page: 6, address: 02 is O00�. If not, select
Adjustment PageF
page: 6, address: 01, set data: 00, and press the PAUSE button of
Adjustment Address49the adjustment remote commander.
Specified ValueC0 to FF
Switch setting:
1) NIGHT SHOT ..................................................................OFF
Note:The right two digits of the DDS display data is the object data.
00 00 XX2) DIGITAL ZOOM (Menu display) ...................................OFF
Object data3) STEADY SHOT (Menu display) .....................................OFF
4) VIDEO LIGHT ................................................................OFF
Switch setting:
1) NIGHT SHOT ..................................................................Adjusting method:OFF
2) DIGITAL ZOOM (Menu display) ...................................1) Select page: 0, address: 01, and set data: 01.OFF
3) STEADY SHOT (Menu display) .....................................2) Wait for 2 seconds.OFF
4) VIDEO LIGHT ................................................................3) Select page: 6, address: 01,OFF set data: 11, and press the PAUSE
button of the adjustment remote commander.
Adjusting method:4) Select page: 6, address: 01, set data: 0D, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.button.
2) Select page: D, address: 11, set data: 02, and press the P(When the standard data is takAUSEe in, the data will be automatically
button of the adjustment remote commander.input to page: F, address: 32 to 35.)
3) Select of page: 0, address: 03, and set data: 01.5) Select page: 6, address: 02, and check that the data is O01�.
4) Select page: 6, address: 56, and set data: 40.6) Perform OAuto White Balance Adjustment�.
5) Select page: 6, address: 01, set data: 19, and press the PAUSE
button of the adjustment remote commander.Processing after Completing Adjustments
6) Select page: F, address: 49, set data: 08, and press the P1) Select pagAeUSE: 6, address: 01, set data: 00, and press the PAUSE
button.button of the adjustment remote commander.
7) Check that the DDS display data (Note) lies within the specif2) Select page: 0, address: 01, and set data: 00.ied
value.
Processing after Completing Adjustments
1) Select page: D, address: 11, set data: 00, and press the PAUSE
button of the adjustment remote commander.
2) Select page: 0, address: 01, and set data: 00.
3) Select page: 0, address: 03, and set data: 00.
4) Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
5) Select page: 6, address: 56, and set data: 00.
5-17 |
ACEC
