DVP-S9
SECTION 4
TEST MODE
Note:Use following buttons in the test mode.Version Display Mode
no mark: Button of DVD/video CD/CD player (DVP-S9)Procedure:
*1 : Button of A/V amplifier (TA-S9D)
1. Enter the GC test mode.
*2 : Button of tuner (ST-S9)2
2. Each time the [DISC 1] or [TUNER MEMORY]* button is
pressed, microcomputer or mechanism deck version is dis-
[Change-over the Color System]
played of each unit.
Y The color system can be changed over NTSC or PAL.2
3. Press the [DISC 3] or [TUNING +]* button to detail is dis-
Procedure:
played the version.
1
1. Press theI/1 * button to turn the power on.
1
2. Turn the [FUNCTION]* knob to select ODVD�, and press
Key Check Mode
thex button.
Procedure:
3. While pressing the both [RETURN] and [REPEAT] buttons,
1. Enter the GC test mode.
turn the power off.2
2. Press the [DISC 2] or [TUNING --]* button to set the key check
1
4. Press theI/1 * button to turn the power on. The color sys-
mode, and displaOK 0 J 0 ys �V 0 on the fluorescent indicator
tem is changed over.
tube of tuner unit.
3. All buttons are pressed of video CD unit, all LEDs are blink-
[Cold Reset]
ing of video CD unit. (not change the display of fluorescent
Y The cold reset clears all data including preset data stored in the
indicator tube)
RAM to initial conditions. Execute this mode when returning
the set to the customer.
Releasing the GC Test Mode
Procedure 1:
To release from this mode, press three buttons in the same manner
1
1. Press theI/1 * button to turn the power on.
as entering this mode or disconnect the power cord.
2. While pressing the both [PLAY MODE] andx buttons, press
theM button.
[DVD Service Mode]
3. The set is reset, and becomes standby state.
Y This mode can run the DVD sled motor optionally. Use this
mode, for instance, when cleaning the optical pick-up.
Procedure 2:
Procedure:
1
1. Press theI/1 * button to turn the power on.1
1. Press theI/1 * button to turn the power on.
12
2. While pressing the [DIGITAL]* button, press the [DISPLAY]*1
2. Turn the [FUNCTION]* knob to select ODVD �.
button.
3. While pressing the both [PLAY MODE] andx buttons, press
3. The set is reset, and becomes standby state.
the. button.
4. Set to the DVD service mode.
[DVD Delivery Mode]
5. With the DVD in stop status, prM button to moess theve
Y This mode moves the optical pick-up to the position durable to
the optical pick-up to outside trmack,b or press theutton
vibration. Use this mode when returning the set to the customer
to inside track.
after repair.
6. To release from this mode, perform as follows.
Procedure:
1) Move the optical pick-up to the most inside track.
1
1. Press theI/1 * button to turn the power on.
2) Disconnect the power cord.
1
2. Turn the [FUNCTION]* knob to select ODVD �.
Notes: Y Always move the optical pick-up to most inside track when
11
3. While pressing the [EQ ON/OFF]* button, press theI/1 *
releasing from this mode. Otherwise, a disc will not be un-
button.loaded.
4. The message OLOCK � is displayed on the fluorescent indica-Y Do not run the sled motor excessively, otherwise the gear can
tor tube of tuner unit and turn the power off automaticallbe chipped.y, and
the DVD delivery mode is set.
[DVD Cancellation Mode of Repeat Limitation]
[GC Test Mode]Y This mode can cancel the DVD repeat limitation (5 times).
Enter the GC Test ModeProcedure:
1
Procedure 1:1. Press theI/1 * button to turn the power on.
11
1. Press theI/1 * button to turn the power on.2. Turn the [FUNCTION]* knob to select ODVD �.
2. While pressing the both [PLAY MODE] andx buttons, press3. While pressing the both [PLAY MODE] andx buttons, press
theZ (DISC 1) button.the [REPEAT] button.
3. LEDs and fluorescent indicator tube are all turned on of all4. DVD repeat limitation is canceled.
units.5. To release this mode, disconnect the power cord.
Procedure 2:[DVD Disc Tray Lock Mode for Burglary Prevention]
1
1. Press theI/1 * button to turn the power on.Procedure:
21
2. While pressing the both [STEREO/MONO]* and1. Press theI/1 * button to turn the power on.
1 21
[CINEMA STUDIO C]*buttons, press the [CLOCK/TIMER]*2. Turn the [FUNCTION]* knob to select ODVD �.
button.3. While pressing the both [PLAY MODE] andx buttons, press
3. LEDs and fluorescent indicator tube are all turned on of allthem button, turn the power off.
units.
11 |
ACEC
