HCD-S400
4-9. DRIVE AUTO ADJUSTMENT21. EQ Boost Adjust
22. Auto LFO Adjust
On the Test Mode Menu screen, press [1] key on the remote23. Auto Track Gain Adjust, Search Check
commander, and the drive auto adjustment menu will be displayed.
Search Check
## Drive Auto Adjustment ##24. 32Tj Fwd
25. 32Tj Rev
Adjustment Menu26. 500Tj Fwd
27. 500Tj Rev
0. ALL
28. All Servo Stop
1. DVD-SL29. Eep Copy Loop Filter Offset
2. CD
3. DVD-DL
4. LCD2. CD
Select [2], insert CD disc, and press [ENTER] key, and the
adjustment will be made through the following steps, then adjusted
Exit: RETURNvalues will be written to the EEPROM.
Normally[0], is selected to adjust DVD (single layer), CD, DVDCD Adjustment Steps
(dual layer), and SACD in this order. But, individual items can be
1. Sled Tilt Rest
adjusted for the case where adjustment is suspended due to an error.2. Disc Check Memory CD
In this mode, the adjustment can be made easily through the
3. Wait 500 msec
operation following the message displayed on the screen.4. Set Disc Type CD
The disc used for adjustment must be the one specified for
5. LD ON
adjustment. However, for SACD disc, use the player with initial6. Spdl Start
data if the disc is not available.
7. Wait 500 msec
8. Focus Servo ON 0
0. ALL
9. Auto Track Offset Adjust
10. CLVA ON
Select [0] and press [ENTER] key, and the servo set data in
11. Wait 500 msec
EEPROM will be initialized. Then, 1. DVD-SL disc, 2. CD disc, 3.12. Tracking ON
DVD-DL disc, and 4. SACD disc are adjusted in this order. Each
13. (TC Display Start)
time one disc was adjusted, it is ejected. Replace it with the specified14. Wait 1 sec
disc following the message. Though the message to confirm whether
15. Jitter Display Start
discs other than SACD disc are adjusted is not displayed, you can16. Sled ON
finish the adjustment if pressing the x button. During adjustment
17. Check CLV ON
of each disc, the measurement for disc type judgment is made. As18. Auto LFO Adjust
automatic adjustment does not judge the disc type unlike
19. Auto Focus Offset Adjust
conventional models, take care not to insert wrong type discs. Also,20. No Adjustment
do not give a shock during adjustment.
21. Auto Focus Gain Adjust
22. Auto Focus Offset Adjust
1. DVD-SL (single layer)23. Eq Boost Adjust
24. Auto LFO Adjust
Select [1], insert DVD single layer disc, and press [ENTER] key,25. Auto Track Gain Adjust, Search Check
and the adjustment will be made through the following steps, then
adjusted values will be written to the EEPROM.
Search Check
26. 32Tj Fwd
DVD Single Layer Disc Adjustment Steps
27. 32Tj Rev
1. SLED TILT Reset28. 500Tj Fwd
2. Disc Check Memory SL
29. 500Tj Rev
3. Wait 300 msec30. All Servo Stop
4. Set Disc Type SL
5. LD ON
6. Spdl Start
7. Wait 1 sec
8. Focus Servo ON 0
9. Auto Track Offset Adjust
10. CLVA ON
11. Wait 500 msec
12. Tracking ON
13. Wait 1 sec
14. Sled ON
15. Check CLV Lock
16. Auto LFO Adjust
17. Auto Focus Offset Adjust
18. Auto Tilt Position Adjust
19. Auto Focus Gain Adjust
20. Auto Focus Offset Adjust
15 |
ACEC
