3. If the panel?s surface gets dirty, wipe it with cotton or
SAFETY NOTICEa soft cloth. If it is still dirty, try breathing on the
Handling the LCD Modulesurface to create a light condensate and wipe it again.
Safety PrecautionIf the surface is very dirty, we recommend a CRT
In case the screen is damagedcleaning agent. Apply the agent to a cloth and then
and the internal liquid leaks, dowipe the panel?s surface. Do not apply cleanser
not suck or drink the internaldirectly to the panel. Also, never scratch the surface.
fluid. Nor do you touch it either,
otherwise you might be poisoned
or get a rash with your skin. If
the internal fluid enters your
mouth, rinse with water. If it
adheres to your skin or clothes,
wipe it away with alcohol and
then wash with water. If it enters
your eyes, wash with running
water immediately.4. If water or other liquid is left on the panel?s surface for
a long period, it can change the screen?s tint or stain it.
Precautions for handling the LCD moduleBe sure to quickly wipe off any liquid.
The LCD module can be easily damaged during assembly
or disassembly. Observe the following precautions when
handling the LCD module:
1. When installing the LCD module in the LCD cover, be
sure to seat it so that it is properly aligned and
maximum visibility of the display is maintained.
5. Glass is used in the panel, so be careful not to drop it
or let it strike a hard object, which could cause
breakage or cracks.
2. Be careful to align the four holes at the right side and
left side of the LCD module with the corresponding
holes in the LCD cover before securing the module
with four screws. Do not force the module into place,
because stress can affect its performance. Also, the
panel?s polarized surface is easily scarred, so be
careful when handling it. |
ACEC
