RECORDING Advanced Features (cont.)
18 EN
Focusing
Auto Focus
Focus detection
The camcorderOs Full Range AF system offers continuous
zoneshooting ability from close-up to infinity. However,
correct focus may not be obtainable in the situations
listed below (in these cases use manual focusing):
YWhen two subjects overlap in the same scene.
YWhen illumination is low.*
YWhen the subject has no contrast (difference in
brightness and darkness), such as a flat, one-colour
wall, or a clear, blue sky.*
YWhen a dark object is barely visible in the viewfinder.*
YWhen the scene contains minute patterns or identical
patterns that are regularly repeated.
YWhen the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
YWhen shooting a scene with a high-contrast
background.
* The low-contrast warning O� appears in the
viewfinder.
Focus Lock
This feature locks the focus in place, which is especially
FARNEARhelpful in the following situations:
YWhen things pass between your subject and the
camcorder. Engage the focus lock function to lock your
subject in before recording.
YWhen you want your subject to be focused, and to
PROGRAM AE select dial
appear in a corner of the screen. First, center on the
subject and focus using auto focus mode. Then engage
the focus lock function and move the camcorder until
the subject is where you want it.
SELECT MODE
Turn the PROGRAM AE select dial to any position
1except AUTO LOCK.
LOCK FOCUS
Press FAR or NEAR. The focus lock indication O�
2appears in the viewfinder.
RELEASE FOCUS LOCK
Press FAR and NEAR simultaneously. The focus lock
3indication disappears.
NOTES:
cIf the lens is smeared or blurred, accurate focusing is
not possible. Keep the lens clean, wiping with a piece
of soft cloth if it gets dirty. When condensation occurs,
wipe with a soft cloth or wait for it to dry naturally.
cWhen shooting a subject close to the lens, zoom-out
first (Z pg. 12). If zoomed-in in the auto focus mode,
the camcorder could automatically zoom out
depending on the distance between the camcorder and
the subject. *When Tele Macro (Z pg. 29) is activated,
the camcorder will not zoom out automatically. |
ACEC
