ADDING CHANNELS TO THE TV?S MEMORY
When you press Channel or , your TV will stop only on the channels stored in the TV?s channel memory.
Follow the steps below and on the next page to program all active channels into the TV?s memory.
Programming channels automaticallyAdding and erasing channels manually
Your TV can automatically detect all active channels in yourAfter you have programmed the channels automatically, you
area and store them in its memory. After the channels arecan manually add or erase specific channels.
stored automatically, you can manually add or erase individualTo add or erase channels:
channels .
To program channels automatically:
Press MENU, and then press or until the SET UPSelect the channel you want to add or erase. If you are
11
menu appears.adding a channel, you must select the channel using the
Channel Number buttons.
Press or until the TV/CABLE is highlighted, and then22
press ENTER to display the pull-down menu.2Press MENU, and then press or until the SET UP
menu appears.
3Press or to highlight either TV or CABLE, depending
on which you use. If you use an antenna, highlight TV; if3Press or to highlight ADD/ERASE, and then press
you use cable, highlight CABLE.ENTER to display the pull-down menu.
Press ENTER.Press or to select ADD or ERASE, depending on the44
function you want to perform.
Press to select CH PROGRAM.5
5Repeat steps 1-4 for other channels you want to add or
Press ENTER to start channel programming. The TV willerase.
6
automatically cycle through all the TV or Cable channels
(depending on which you selected), and store all active
channels in the channel memory.
While the TV is cycling through the channels, the mes-
sage ?Programming Now?-Please Wait? appears.
7When channel programming is complete,the message
?Completed? appears.
8Press Channel or to view the programmed channels.
- 14 - |
ACEC
