Description of the Appliance
Extractor version
" The hood is supplied as an extractor unit
and can also be used with a filteringD
function by fitting one charcoal filter
(special accessory).
" You will need original AEG charcoal filter
for this function (see Special Accessories).
" The air is discharged to the outside through
a pipe, which must be fitted to connection
flange D. Fig. 1.
" In order to obtain the best performance the
hose should have a diameter equal to the
outlet hole.Fig. 1
Should there already be a pipe of diameter
125 mm that ducts to the outside through
the walls or roof, it is possible to use the
150/125 mm reduction flange provided. In
this case the hood will be slightly more
noisy.
Filter Version
" The air is filtered through an charcoal filter
and returned to the kitchen through the top
grill of the outlet pipe.
" You will need an original AEG KF20
charcoal filter for the filtering function. (See
Special Accessories).
" Assemble the deflector (3 parts): the
three parts must be fixed with 2 screws O
3.5 13 mm, the extension of the deflector
is adjustable and must correspond to the
width of the chimney flue support, to which
it must be fixed.
Fix the deflector using 4 screws O 2,9x6.5
mm. Fig. 2.
" Optionally, the position of the chimneyFig. 2
elements can be changed.
When using the hood in the filter version
the chimney must be fixed at the top, with
the air outlet grill at the side.
66 |
ACEC
