Two cabinet securing brackets
+
are supplied with the installa-
tion pack. They need to be
assembled onto the cabinet
prior to cabinet being pushed
into the Kitchen aperture.
Left handRight hand
bracketbracket
1/a
To fit these brackets remove the two screws at the top left and right+
hand front corners of the cabinet.
Position the two brackets as shown in the figure and replace the two
+
securing screws.
Push the appliance into
+
place. The plug socket nec-
essary for connection of
596
the appliance to the elec-
tricity supply should be
positioned, so that the plug
555
is not placed in the recess.max
To adjust the height pro-
ceed as follows:-
+
Loosen or tighten the two2Li89
+
front feet.
The rear feet are adjusted by turning the screw in the front kick plate
+
to the left or right.
If necessary, pads are supplied for the
+
rear feet to make sliding the appliance
in and out of the recess easier. To fit the
pads, press them onto the rear feet.
If required, the dimensions of these
pads can be reduced by breaking them
where marked.
II52
2/a
10 |
ACEC
