g
Caution! Danger of burns from the The saved measures remain stored
13
frothing aid! Hold the frothing aid only when the coffee machine is switched
by the black seal.off. If your coffee cups or your taste
change, you can easily change the cup
measure(s) to your new requirements,
6Preparing Hot Water
whenever you want.
The hot water can be used to pre-heat
cups and for making hot drinks, e.g. tea
8Changing and Saving the
or instant soups.
Coffee Quantity
Caution! Danger of scalding when the
1
hot water nozzle is activated! Hot You can set and save a different coffee
water or steam output can cause quantity for each cup symbol to your
scalding. Activate the hot water nozzle individual requirements. This can be
only when a container is under the hot done only for use with coffee beans,
water nozzle.not for use with ground coffee.
0 Place a container under the hot water 0 Repeatedly press the "Cup Measure"
nozzle. Set the Selection dial for steam key (Fig. 3, d) until the desired cup
and hot water (Fig. 1, D) to the symbol is indicated.
position (Fig. 19). Hot water is now 0 Then repeatedly press the "Coffee
prepared.Quantity" key (Fig. 3, c) until the
0 After you have dispensed the hot water desired coffee quantity indicator is
turn the Selection dial for steam and illuminated, and hold the key pressed
hot water (Fig. 1, D) back to the (Fig. 20).
position (Fig. 19) and remove the con-After the key has been held for a few
tainer.seconds, all the indicators are con-
stantly on - except for the one
selected (Fig. 21). Now release the key.
7Changing and Saving the
The coffee quantity is now saved.
Cup Measure
0 Repeat the process if you would like to
The coffee machine is factory-set to save coffee quantities for the remain-
standard measures. These measures can ing cup symbols.
be individually changed to your own
The saved quantities remain stored
taste and saved for each cup size.3
when the coffee machine is switched
0 Repeatedly press the "Cup Measure"
off.
key (Fig. 3, d) until the cup symbol, for
which you wish to change the measure,
is illuminated.9Setting the Grinding
0 Place the appropriate cup under the Texture
coffee dispenser (e.g. coffee mug).
Note! The grinder settings must be
0 Press and hold the Key for 1 cup of 1
changed only while coffee is being
coffee (Fig. 3, b) until the cup/mug
ground. Making adjustments to the
is filled to the desired measure. Release
the key. Your new cup measure is now stationary grinder can damage the cof-
fee machine.
saved.
0 Press the Key for 1 cup of coffee (Fig.
0 Repeat the process if you would like to
3, b) to make one cup of coffee.
change the measures for the other cup
While the coffee is being ground, use
symbols.
the Lever for setting grinding texture
35 |
ACEC
