Making the Vacuum CleanerUsing the Nozzles
Ready for UseThe nozzles are connected to the suction tube
The accessories can be connected by pressingby pressing and turning, and removed by pulling
together and turning, and separated by pullingand turning.
and turning:
Connect the Suction Hose
Crevice Nozzle
Plug the suction hose connector into the suc-For vacuuming crevices, gaps and corners.
tion inlet. The r cocnnectolips into place and is
free to rotate.
Press the release button and pull out the con-
nector in order to remove the suction hose.
Using the VARIO 500 Floor Nozzle
Connect Together the Suction Hose and For daily care of carpets and hard floors. The
Suction Tube.floor nozzle is manually adjustable. Extended
Firmly connect the suction tube handle to thebrushes for smooth floors, retracted brushes for
suction tube.carpets.
See additional acs ceforsso rspecial iefloor noz-
zles.
Upholstery Nozzle
For vacuum cleaning all upholstered furniture,
mattresses, etc.
The thread lifting strips on the nozzle even pick
Mains Connection/Cable Rewindup thread and lint.
The mains cable is stored in the cable compart-
ment. Pull out the cable and plug into a mains
socket.
Connect the Suction Tubes Together
(depending on model)
Connect the two tubes together.Unplug from the mains socket. Press the foot
button, the cable is automatically rewound after
vacuuming.Crevice and Upholstery Nozzle Stored in the
Appliance
To meet individual cleaning requirements two
accessories are included with the appliance,
these are stored in an integrated accessories
compartment.
Open the lid of the accessories compartment
upwards at the recessed handle.
The nozzles can be fitted to both the suction
Adjust theTelescopic Tubetube and the suction hose handle as required.
(depending on model)
Push down the button on the tube and adjust
the tube to the desired working position.
1213 |
ACEC
