PHANTOM modeTo change the delay time of the surround speakers or
center speaker when using the Dolby Digital Surround
or Dolby Pro Logic mode
While the Dolby Digital Surround (except O2chSTEREO�) or Dolby
Pro Logic is activated, press the MANUAL SELECT button on
3 STEREO NORMAL or WIDE modethe remote control repeatedly so that OCEN 0mS� or OSUR 5mS�
(SUR 20mS) is displayed. Then, within 4 seconds, press the
N or M button or turn the MULTI JOG. The delay time changes
as shown below.
* OL� or OR� flashes to indicate one of the front speakers from
[Center speaker]
which the noise signal is output.
Adjust the delay time so that lines (voice in a movie) are heard
clearly and naturally.
3 Adjust the sound level of the center and surround
The center speaker delay time is initially set to 0 ms
speakers.
(milliseconds). It can be adjusted between 0 and 5 ms in 1 ms
While OCEN,� OS-L� or OS-R� flashes in the displathey, press
step.
TUNING UP or DOWN button while pressing the SHIFT button
on the remote control so that the sound level of the center or
surround speakers matches that of the front speakers.
[Surround speakers]
Adjust the delay time to suite your preference.
The balance of the front speakers can be adjusted as well
Dolby Digital Surround
while OL/R� is displayed.
The speakers delay time is initially set to 5 ms. It can be adjusted
between 0 and 15 ms in 5 ms steps.
NOTE
Dolby Pro Logic
The N or M button on the main unit cannot be used.The speakers delay time is initially set to 20 ms. It can be adjusted
between 15 and 30 ms in 5 ms steps.
4 Press the MANUAL SELECT button again to stop
the noise signal.
NOTE
Y When adjusting the delay time of the surround speakers or
NOTE
center speaker for the Dolby Digital Surround, that of the Dolby
When adjusting the speaker level balance of the Dolby Digital
Pro Logic is changed and vice versa.
Surround, that of the Dolby Pro Logic is also changed and vice
Y When the surround speakers delay time of the Dolby Digital
versa.
Surround is set to 0 ms (5 ms, 10 ms , or 15 ms), that of the
Dolby Pro Logic is set to 15 ms (20 ms, 25 ms or 30 ms), and
About the channels
vice versa.
The left and right speaker create the stereo effsect.
The center speaker helps precise sound positioning over a
To adjust the speaker level balance while listening to the
broad sound field.
source
The rear-mounted surround speaker enhance the sOdepth� of
The speaker level balance can be changed after adjusting it with
the sound field.
the noise sequencer. The balance can be changed whenever
the Dolby Digital Surround or Dolby Pro Logic system is activated.
1 Play a disc or video software recorded in Dolby Pro Logic or
Dolby Digital Surround.
2 Press the MANUAL SELECT button on the remote control
repeatedly so that OL/R,� OCEN,� OS-L� or OS-R� appears on the
display.
3 Press the N or M button or turn the MULTI JOG while the
speaker name to be adjusted is displayed.
17 ENGLISH |
ACEC
