CD Changer indicatorTrack number
TROUBLESHOOTING
Error code
In the following cases the corresponding error code
indication appears. Follow the suggestions below to
solve such problems. If the error code indication does
not disappear, consult an AIWA service center.
CD number
1Press FNC repeatedly to display OCD-CH.�E01* The disc magazine is not properly inserted in the
CD Changer. Reinsert the magazine. Refer to
The CD Changer play starts.
the instruction manual for the CD Changer.
ToPressE02* No CDs are loaded in the disc magazine. Insert
Skip to the next track tCDs properly. Refer to the instruction manual for
the CD Changer.
E03Focus error. Check that the CD is loaded properlySkip back to the beginning of
the current track or to ther
(right side up, etc.), and the CD contains validprevious track
data.
E04* Problem with the CD Changer. Reset the unit byAdvance rapidly to locate aand hold t, then
desired pointrelease it at the
pressing the Reset button. If this does not solvedesired point
the problem, consult an AIWA service center.
Reverse rapidly to locate aand hold r, then
* CDC-X517M onlydesired pointrelease it at the
Reset buttondesired point
Start CD Changer play fromDISCNIf a CD does not operate properly, press the reset button
the first track on the next discwith a pointed object such as a pencil, etc. Note that all
Start CD Changer play fromDISCMyour settings will be erased if this button is pressed.
the first track on the previous
disc
Intro Play
You can locate a desired track by monitoring the first 10
seconds of all the tracks on the CDs in the disc magazine.
1Press INT during CD Changer play.
OSCAN� appears in the display.
Reset button
2Press INT again when the desired track is played.
The unit returns to normal CD play.
One track Repeat Play
You can play a track repeatedly.
1Press REP1 during CD Changer play.MAINTENANCE
OREPEAT1� appears in the display.
To cancel Repeat Play, press REP1 again.
Cleaning the front panel
Wipe the surface with a soft, dry cloth.
One disc Repeat Play
You can play all tracks on a disc repeatedly.
Cleaning the connector
1Press REP during CD Changer play.
The connector needs to be cleaned occasionally. WipeOREPEAT� appears in the display.
the surface of the connector with a cotton swab slightly
To cancel Repeat Play, press REP again.
moistened with alcohol.
Random Play
Back of the front panel
You can play all the tracks on the CDs in the disc
magazine in random order.
1Press RNDM during CD Changer play.
ORANDOM� appears in the display.
To cancel Random Play, press RNDM again.
Note
Pressing r during Random Play locates the beginning
of the current track. The unit does not retrieve previous
tracks during Random Play.
7 ENGLISH
CDCX517MX417/X317(YU)-total-En-8001/CDC-X517M/X417/X317(YU)E800.12.25, 2:45 PM |
ACEC
