SETTING THE SLEEP TIMER
The unit can be turned off automatically at a
specified time.
MODE
e PLAY/
1Hold down REPEAT/MODE/SLEEP*
PAUSE
until OSLEEP� flashes in the display.
w REC
* or MODE on the remote control (CSD-TD69
f, gonly)
s STOP2Within 4 seconds, press f or g to
specify the time until the power is
(CSD-TD69 only)turned off.
Each time it is pressed, the time changes
between 10 and 180 minutes in 10-minute
steps.
Specified time
RECORDING
1Insert a tape with the side to be recorded
on facing out and the exposed side facing
down.While the sleep timer works, OSLEEP � is
displayed.
2Get ready to record from the source.
To record from a CD, press CD and load the disc.
To check the time remaining until the power
To record from a radio broadcast, press
is turned off
RADIO/BAND and tune to a station.
Repeat step 1 shown above. The remaining time is
3Press w REC.displayed for 4 seconds.
The unit enters recording pause mode and OREC �En
flashes slowly in the display.To cancel the sleep timer
Repeat step 1 to display the remaining time and
4Press e to start recording.
hold down REPEAT/MODE/SLEEP again until
OREC � lights up in the display.
OOFF� is displayed.
When the selected function is CD, CD play and
recording starts simultaneously.
Simple sleep timer setting
Press REPEAT/MODE/SLEEP while the power is
To record only the selected tracks of a CD
off. The unit is turned on with the last function, and
1 Follow steps 1 to 4 of PROGRAMMED PLAY on
the sleep timer is automatically turned on with the
page 9 to program tracks.
30-minute setting.
2 Press w.
Select the function, if you need, and start playback.
3 Press e.
To stop recording, press s.
To pause recording (only when the source is RADIO),
press e. During recording pause mode, OREC �
flashes slowly. To resume, press it again.
To erase recording, press TAPE and start recording
(press w then e).
After recording, press POWER 6 STANDBY/ON to
turn the power off.
To prevent accidental erasure
Break off the plastic tabs on the cassette tape with a
screwdriver or other pointed tool after recording.
To record on the tape again
Cover the tab openings with adhesive tape, etc.
Side A
Tab for side A
ENGLISH 11 |
ACEC
