Basic
Adjusting Source Signal LevelsBBE Mode On/Off
(CDM-7870R only)
If the difference in volume level between the CD
The BBE (Barcus Berry Electronics) processorplayer and FM radio is too great, adjust the FM
signal level as follows.
installed in this unit is designed to correct the
phase distortion inherent in most loudspeaker
1Press and hold the SETUP button for at least 3designs. Ensuring the phase integrity of the
seconds.signal driving the speakers improves the
accurate reproduction of the sound.
2Press the g DN or f UP button to select
1Press and hold the BBE button for at least 2the FM signal level mode.
? FM LV ?? REG ?? SUB ?seconds to turn on the BBE mode.
? AUX ?? 100kHz/50kHz ?Each press toggles between the BBE on and off
modes.
FR
3Press the BAND button to select the FM signal
level HI (High) or LO (Low) to make the signalSelecting BBE Mode
levels between the FM band and CD player and
(TDM-7585R only)
cassette player closer.
4After setting is completed, press the SETUPThe BBE (Barcus Berry Electronics) processor
button to return to normal mode.installed in this unit is designed to correct the
phase distortion inherent in most loudspeaker
designs. Ensuring the phase integrity of theES
Adjusting Volume/Balance
signal driving the speakers improves the
(Between Left and Right)/Faderaccurate reproduction of the sound.
(Between Front and Rear)
1Press and hold the BBE button for at least 2
seconds to turn BBE on.
1Press the MODE button repeatedly to choose
the desired mode.Each press toggles between the BBE on and off
Each press changes the modes as follows:DEmodes.
? VOL ? BAL ? FAD
2In BBE mode, press the BBE button to switch to
the BBE adjusting mode.
NOTESNOTE
? If the 5 or 6 button is not pressed in 5 seconds afterIn BBE adjusting mode, wait 5 seconds without
selecting the BAL, or FAD mode, the unitpressing any button. The BBE adjusting mode is turned
automatically sets in the VOL mode.OFF.
? When the subwoofer, BBE mode is set to ON, the
3To change to a desired BBE level, press the 55555 orITlevel of the subwoofer, BBE can be adjusted.
66666 buttons.
2Press the 55555 or 66666 button until the desired sound isThe BBE level can be changed from +1 to +3.
obtained in each mode.
SE
7-EN |