HOW TO USE THE PROGRAMMER
HOW TO SET THE COOKING TIME (4 hours max)
1. Set the selector knob F and the cookingF
temperature to the desired level.
2. Push button : the display shows 0.00 and the
green led indicating length flickers.
3. Set the cooking time with the forward or backward
button (i.e. 0.30).
If not set within 5 seconds, the real time will be
displayed again. Repeat the operation.
4. Push button : to confirm the cooking time.
The display shows the set time and the green led
switches on. The display starts the count down (i.e.
-0.30 on figure).
5. To interrupt cooking or to modify the cooking time
set, push button again and set the new time.
6. At the end of cooking, the display will show -End.
The green led switches off and the acoustic signal
sounds intermittently.
To interrupt the acoustic signal, push any button. The
display will show the real time again.
7. Set the oven selector knob F to position 0 and
the thermostat control knob to position .
Note: The real time is displayed by pushing button
during cooking.
13 |