496gb94500.fm5 Page 19 Wednesday, July 4, 2001 11:19 AM
Care and Maintenance
Before cleaning or carrying Cleaning the outside of Cleaning the inside of the
out maintenance, switch off the appliance:dishwasher:
the appliance, disconnect the To clean the outside of the Regularly wipe the door seal
mains plug and turn off the appliance, use a neutral and inside of the door with a
water tap.detergent and a damp cloth. damp cloth to remove any
Clean the control panel using food residue.
a damp cloth alone.
Do not use abrasive
detergents.
Upper spray arm:4. Tighten the fixing nut by
1. Slacken the fixing nut (by turning it clockwise.
turning it counter-clockwise) The fixing nut must be
and detach the spray arm by tightened until it clicks!
pulling it down.
Make sure the spray arm
2. Rinse the nozzles.rotates freely.
3. Remount the spray arm by
aligning it with the rotary
mounting.
Lower spray arm:4. Push the spray arm down
1. Remove the spray arm by firmly until it is fixed in place.
lifting it upwards.
2. Rinse the nozzles.
Make sure the spray arm
3. Remount the spray arm by rotates freely.
aligning it with the rotor pin
and insert it.
19 |
ACEC
