4gb94510.fm5 Page 16 Friday, October 26, 2001 2:38 PM
Table of water hardness categories:
System 2 and 3
Hardness
°dH°fH°Clarkemmol/lcategoryIndicator Lights
0 - 60 - 110 - 80 - 1.10no indicator light on
7 - 1612 - 299 - 201.2 - 2.91
/
17 - 2130 - 3721 - 263.0 - 3.72
/
22 - 3538 - 6027 - 443.8 - 6.23
/
System 4
°dH°fH°Clarkemmol/lHardness
category
0 - 60 - 110 - 80 - 1.1
7 - 812 - 159 - 101.2 - 1.4
9 - 1016 - 1711 - 121.5 - 1.8
11 - 1218 - 2113 - 151.9 - 2.1
13 - 1622 - 2916 - 202.2 - 2.9
17 - 2130 - 3721 - 263.0 - 3.7
22 - 3038 - 5427 - 383.8 - 5.4
31 - 5055 - 8939 - 625.5 - 8.9
Note:approx. 4 litres of water are required for regenerating the water softening system.
The overall water consumption per load can therefore be increased by between 0 and a
max. of 4 litres according to the water hardness setting.
To fill the salt container:4. Fill the salt container to the
Warning: only use rim with salt (using the filler
regeneration salts for use provided) (when filling for
in domestic dishwashers!the first time use min. 1.5 kg
Do not fill the salt container and max. 2 kg) and stir with a
with unsuitable substances, spoon handle.
such as detergent, as this will 5. Screw the cap back on by
cause irreparable damage to turning it clockwise and make
the water softener system.sure it is properly fastened.
1. Remove the lower rack.6. Fit the lower rack.
2. Unscrew the cap by turning it 7. If regeneration salt is to be
counter-clockwise.added, immediately start a
3. When first using the wash programme (rinsing
dishwasher: fill the salt alone is not sufficient) in order
container to the rim with to eliminate any residual saline
water.solution straight away and
avoid corrosion.
Salt level indicator:Electric indicator:Visual indicator:
The dishwasher is equipped The salt level indicator The float is clearly visible in
with an electric or visual salt the cap window when the
lampon the control salt container is full.
level indicator (depending
panel lights up when the salt
on the model installed).The float lowers and is no
container is empty.longer visible when the salt
container is empty.
16
Black Process Plate |
ACEC
