Before using the dishwasher, read the user instructions!
GB
GSFH 1888Quick Reference Guide
Wash cycle
Programme selector knob
Programme
Pre-RinseWashingDrying
end
Options
On / Off button3)
Time and failure display
Indicates in hours the time remaining until the start
of the wash cycle. Switches off at programme start
and indicates the remaining time in hours and
Start buttonminutes.
Switches ?on? when the dishwasher is ?F....? Information for the After-Sales Service
operating. Flashes when a fault occurs.
?Delayed start? buttons
Switches off at the end of the programme.
The wash cycle can be programmed to start after
1 - 24 hours. With each successive touch of the
button, the delayed start indicator increases by 1
Indicatorshour, and after 24 returns to 00. Then press the Start
button. The dishwasher will start at the set time.
Add regeneration salt
Only add regeneration salt immediately before ?Half load? button
starting a wash programme.
This function can be used with any programme. The
indicator lamp switches on. The wash cycle is
Add rinse aid
activated for the upper or lower rack only.
When washing without the top rack, press the ?Half
No water
Check that the appliance fills with water.Load? button (LED alight).
2)
Programme chartDetergentConsumption3)
ProgrammesLoading instructionsABLitreskWhMinutes
Automatic programme recommended for
AutoNormal40-55°Croutine washes, with no dried-on or XX10.0-13.0 0.80-1.0560-120
burnt food (not for EN 50242).
Automatic programme recommended for
AutoIntensive60-70°Cheavily soiled crockery with dried-on or XX13.0-20.0 1.10-2.00 100-150
burnt food (for example EN 50242).
Pre-RinsecoldCrockery to be washed later.--4.00.0314
Light soiling, for example glasses and
Glass40°CX-10.00.8055
cups.
Lightly soiled crockery with no dried-
Rapid 30 min40°CX-10.00.6530
on food.
1)
Normal50°CNormally soiled crockery.XX13.01.05120
4) 5)Normally or heavily soiled crockery,
Hygiene +XX13.01.50115
with additional antibacterial action.
1)Reference programme for energy label EN 50242;4)The bacteria removal efficiency has been tested by the Institut
2)Refer to ?User instructions?;Pasteur de Lille (France), based on the NF EN 13697 standard of
3)Program data obtained in conformity with European standard November 2001.
EN 50242. Values may vary in relation to usage, e.g.: different loads, 5)Programme interruption (e.g. the door being opened) may
water temperatures - above or below 15°C - as well as water compromise the result of the antibacterial rinse.
hardness and power supply voltage, etc.
Important information for Test Laboratories:
For detailed information on the EN comparison test and other tests, contact the following address:
[email protected]?.
5019 496 90398
(We reserve the right to make technical modifications)
BK/I/B/GB
ACEC
