Installation
ImportantConnection to the gas
This cooker must be installed by qualifiedsupply
personnel.
Gas connection must be carried out in
The manufacturer will not accept liability,conformity with the regulations in force. The
should the above instructions or any of theappliance leaves the factory tested and
other safety instructions incorporated in thisregulated for the type of gas indicated on
book be ignored.the plate which is situated in the lower
position near the gas connection tube.
Regulations
Ascertain that the type of gas with which
This appliance shall be installed inthe appliance will be supplied is the same
accordance with the manufacturer?sas that indicated on the plate.
installation instructions, local gas fitting
If different carry out all the operations
regulations, municipal building codes,according to the indications cited in the
AS5601 (AG601) and any other relevantparagraph ?adaption to different types of
statutory regulations.
gas?.
Data labelFor a maximum output and minimum
consumption ascertain that the pressure of
The data label is located centrally on the
front frame of the cooker below the oven.the gas used has the values indicated in
the table of ?burner characteristics?.
This appliance is suitable for Natural or
Universal LPG. Ensure that the gas supply
matches the data label.The joint is mounted on the intake area of
the pipe, fitted with a filleted nut GJ 1/2,
between the sealing components. Screw
Ventilationthe parts without forcing, turn the joint in
Ventilation must be in accordance withthe direction required and then tighten
AS5601 (AG601) Installation Code. Ineverything.
general, the appliance should have
adequate ventilation for complete
combustion of gas, proper flueing and to
maintain temperature of immediate
surroundings within safe limits.
23 |
ACEC
