Chapter 2 Creating You Own Favorite Tones (Patches)
3. To select another effect to be switched on and off,
Adding and Omitting Effects
repeat Steps 1 and 2.
You can switch the internal effects on and off, which lets you 4. Press [EXIT] to return to the Play screen.
change tones by adding and omitting effects.
Using the Buttons to Switch Switching Effects with the Pedals
The GT-6B is set at the factory so that you can use Pedals O1�
Effects On and Off
through O4� to switch specific effects on and off. The names
You can switch each of the internal effects on and off with the of effects that can be controlled with these pedals appear in
respective effect ON/OFF button.the lower row of the display.
fig.02-04
* The effects that can controlled can be selected individually for
each patch (p. 45).
fig.02-06
1,2,34
1. Press the ON/OFF button for the effect you want to be 1
able to switch on and off.1. Press the pedal corresponding to the effect you want to
The effect's name and on/off status appear in the display.
The indicator for an effectOs ON/OFF button lights up switch on and off.
Each time you press the pedal, the effect is alternately
when the effect is enabled, and flashes when that effect is turned on or off, and the pedal indicator lights up or
disabled.
fig.02-05goes out.
* While enabled, effects are indicated in capital letters in the
display; disabled effects are indicated in lowercase letters.
fig.02-07
2. Press the ON/OFF button again to switch the effect on
or off, changing the indicator light status.
* The PREAMP turns on automatically when the SPEAKER is
turned on. Additionally, turning off the SPEAKER Effects
automatically turns off the PREAMP.
* As set at the factory, the indicator for the pedal corresponding If you want to save a tone for which you have made
to the effect being used also lights up and goes out in response settings, use the Write procedure (p. 23) to save the tone
to a User patch.
to the effect status.
* The effect name flashes in the display when that effect is
turned off.
* When you press [FX-1], [FX-2], or [WAH] in Step 1, the
effect set with the FX Select parameter (OMaking More
Detailed Settings with Individual Parameters,� see p. 19) is
switched on and off.
18 |
ACEC
