Mixing audio from various tracks onto a stereo track (Bounce)
6. While listening to the playback from the selected track,
Mixing the playback tracks to a
use the TIME/VALUE dial to adjust the send level until
single stereo track (Bounce)
you like what you hear.
When the send level is 0, no effect will be applied; when
If you have made all of the necessary track settings as
it is 100, the maximum amount of effect will be applied.
described in the previous sections, all that now remains is to
7. If necessary, repeat Steps 5 and 6.combine your tracks and record this mix in stereo.
In addition, you can also record from one track to a different
track using just the BR-1200CD in a procedure known as
Obouncing.�
You can only select one chorus, delay, or doubling
effect. Different types of chorus, delay, and doubling If you are using Drum/Bass/Loop Phrase, these can be
effects cannot be used together.combined with the playback from the recorded tracks in
the mix down process.
To do this, first of all press the track button for the
Drum/Bass/Loop Phrase track (Track 8, 9/10) several
times until it lights up or starts to flash. Then, use the
trackOs fader to adjust its volume to a suitable level and
Y In addition to the cursor, the track buttons can also
bounce the Drum/Bass/Loop Phrase track to a different
be used to directly choose the track to which settings
track.
are to be changed. Furthermore, if the track buttons
for tracks 1 and 2, tracks 3 and 4, tracks 5 and 6, or
tracks 7 and 8 are pressed in unison at this time, you The metronome sound is not bounced when the
will be able to modify the settings for the two track type (p. 157, p. 185) for Tracks 9/10 is set to
selected tracks at the same time. This function is OMETRO&LP.�
extremely useful when you want to match the
chorus/delay/doubling settings of stereo tracks.
As you will probably want to master (p. 146) your song later
Y Note that since tracks 9/10 and 11/12 are fixed as
on, letOs bounce to Track 11/12.
stereo tracks, the parameters for the left and right
sides of each of these tracks will always change in
1. Press [REC MODE] several times until the BOUNCE
the same way. It is not possible to modify the
indicator lights up.
settings of the left and right sides individually.
All inputs sources will be automatically muted at this
Y In addition to the parameters presented on the time.
display, the chorus/delay/doubling also feature
2. Press track button for Track [11/12].
other detailed parameters of sound settings. For
This button will turn red and start to flash, indicating
more detailed information, refer to OUsing loop
that Track [11/12] has been selected as the destination
effects� (p. 125).
for bouncing. Note that the track buttons for tracks that
have been recorded will all be green.
3. Press [REC], then press [PLAY].
Both [PLAY] and [REC] will light up and recording
(bouncing) will start.
4. When you reach the end of the song, press [STOP].
Both [PLAY] and [REC] will turn off, indicating that
bouncing has been completed.
5. To check the track recorded by bouncing, lower all
faders except the one for Track 11/12, and move the
fader for Track 11/12 to a position that gives a suitable
playback volume.
Re
v0.02
86 |