B60 INTEGRATED AMPLIFIERS
SPECIFICATIONS
GENERAL:ADDITIONAL SPECIFICATIONS for B60DA/B60RDA DIGITAL INPUTS:
DIMENSIONS:INPUT SAMPLE RA: TE16kHz to 108kHz.
Standard version: 17 x 1.75 x 11 (43.18 x 4.44 x WORD 28cm)LENGTH: 16, 18, 20, 24 Bit
Rack mount version: 19 x 1.75 x 11 (48.26 x 4.44 x DA28cm)TA FORMAT :SPDIF standard
THD+N: < 0.002%, 20Hz~20kHz
WEIGHT: 17 lbs (7.5 kg)
ADDITIONAL SPECIFICATIONS for B60P/B60RP PHONO INPUTS:
PREAMPLIFIER Section:
THD+N: <0.005%, IM or THD, any frequency or
FREQUENCY RESPONSE: 20Hz~20kHz +/- .05dB combination of frequencies from 20-20kHz,
MAXIMUM OUTPUT :15 volts at rated output or below.
IMD/THD: <0.005% at 3 volts outNOISE: Phono: -80dBA referred to an input of 5 mV
SENSITIVITY :500mV (High level inputs)RIAA ACCURACY: Within less than +/- 0.05dB from 20~20kHz
NOISE: -100dB (Ref. 500mV), 20~20K Hz
inSENSITIVITY:5mV
POWER AMPLIFIER Section:
OUTPUT POWER:60 watts/channel into 8 ohms
100 watts/channel into 4 ohms
THD+N: <0.02% 20Hz~20KHz @ 60 watts
NOISE: 106dB gwlow full output
SLEW RATE: >60v/uSec
DAMPING FACTOR:>500 at 20Hz (8 ohms)
POWER BANDWIDTH:0.5Hz to over 100KHz
SENSITIVITY : .775v
INPUT IMPEDANCE:50K ohms
VARIOUS SPEAKER WIRE TERMINATIONSAMPLIFIER OUTPUT BINDING POSTS
3 |
ACEC
