1. GENERAL INFORMATION - width mm 400
- depth mm 250
- height mm 570
1.1 FOREWORD
Cavity °C +3/+12
The purpose of this document is to provide important
information, regarding the installation, use and Power supply V See data plate
maintenance of this appliance. Before any operation Max power input (1) W See data plate
you should read carefully the information contained in Refrigerant (R134a) gr. See data plate
Max. ambiental Temp.
this manual . °C See data plate
The manufacturer declines all responsibility for any Standard shelves (410x280) n 2
operations effected on the appliance without Max contents cans (355cc) n 96
respecting the instructions reported in this manual. Max contents bottles (0,5LPET) n 48
This manual cannot be reproduced.
1
() Evaporation temperature -10°C and condensation
1.2 DESTINATION OF USE AND RESTRICTIONS temperature +55°C.
The purpose of this appliance is to chill drinks
contained in bottles or cans. Any other use of the
appliance is to be considered improper. ATTENTION: 2.3 SAFETY MECHANICAL CHARACTERISTICS,
RISKS
The appliance is not fit for external installations and
environments subjected to the action of atmospheric The cabinet has no sharp edges, profiles, nor projecting
agents ( rain, direct sun light). parts. The protections for the moving and electric parts
The manufacturer declines every responsibility for are fixed to the appliance with screws, to prevent any
any improper use of the product. accidental access to these dangerous points.
1.3 TESTING
3. INSTALLATION
The appliance is shipped ready for use. The fulfilment
of the tests and inspection operations (visual inspection
In order for the appliance to work correctly, and the
- electrical test - functional test) is guaranteed and
maintain of safety conditions during performance, follow
certified by the specific enclosures (paragraph 8).
the manufacturer?s instructions reported in this chapter.
1.4 INFORMATION FOR YOUR SECURITY.
3.1 REMOVAL OF THE PACKAGE
The construction of the appliance is made
Before proceeding to unpack the appliance check the
according to the European security laws 73/23-
packing of the cooler and its protections.
93/68/CEE and electromagnetic compatibility
Any damage should be reported immediately to the
89/336/CEE.
carrier.
Under no circumstances any damaged appliance can
1.5 RESPONSIBILITY OF THE CUSTOMER
be returned to the manufacturer without prior written
Set up an electrical outlet connected effectively to earth,
authorisation.
suitable to provide the voltage indicated on the data
Remove the polythene, paying attention to not scratch
plate. Make sure that the machine rests on a levelled
the sides with sharp blades or scissors. Remove all the
surface.
protections.
The components of packing should be disposed
2. TECHNICAL DATA according to the local law.
Some components of the packing are marked as
2.1 MATERIALS AND FLUIDS recycleable to allow their identification.
The sections that come into contact with the beverages ATTENTION :The cooling unit is positioned in the top
are made high density Polyurethane injected without part of the appliance, so the gravity center will be high.
using Chlorine Fluorine or toxic plastic materials. A During installation, do not push or to drag the appliance
refrigerant approved by law regulations, HFC , is used to avoid that it capsizes.
in the cooling unit. The type and quantity of the gas During installation, do not push or to drag the appliance
charged in the refrigerant unit is indicated on the data to avoid that it capsizes.
plate.
3.2 POSITIONING
2.2 DIMENSIONS, PERFORMANCES AND The appliance must be placed in a adequately
CONSUMPTIONS ventilated room as far as possible from heat sources,
such as radiators or conditioning pipes.
Make sure that the top ventilation grill is clear, to
Net capacity l 75
allow free air circulation to the refrigerator unit,
Weight appliance + paking: Kg 53
which is located at the top of the appliance.
External dimensions:
Leave at least 30 cm space above the top and at least
- width mm 530 10 cm around the sides and the rear. For appliances
- depth mm 370 supplied with spacer feet, apply them to the bottom by
- height mm 970 inserting them into the relative housing in the clamping
Internal dimensions: screws. The room temperature should not exceed that
recommended for the class of appliance in order to
7 |
ACEC
