CRA TE
TECHNICAL SPECIFICATIONS
OUTPUT POWER RATING50W RMS @ 10% THD, 4 ohms, 13.6VDC in
INPUT IMPEDANCE1M ohm
MAXIMUM SIGNAL ACCEPTED
Mic Low Z2V peak to peak
Mic Hi Z12V peak to peak
Instrument12V peak to peak
GAINMic57dB High Z, 72dB Low Z
Instrument44dB w/Gain switch out, Ch2
85dB w/Gain switch in, Ch1
SENSITIVITYMic3.5mV RMS High Z, 20mV RMS Low Z
Instrument80mV RMS w/Gain switch out, Ch2
.8mV RMS w/Gain switch in, Ch1
Line In Insert400mV RMS
EQS, MICLow?15dB @ 60Hz
Mid?15dB @ 600Hz
High?15dB @ 10kHz
EQS, INSTRUMENTLow12.5dB range @ 80Hz
Mid18dB range @ 800Hz
High18dB range @ 10kHz
ShapeCrate proprietary circuit
INSERT JACKTipLine In
RingLine Out
SleeveGround
SPEAKERSWooferCrate Custom Design 10�, 4 ohm, 100 watt
1.5� voice coil, 16 oz magnet
Tweeter2� Piezo , 4 ohm, 150 watt network
POWER REQUIREMENTSInternal 12 volt DC power supply
DC adapter for use with 120VAC
Optional 12V vehicle lighter adapter
SIZE AND WEIGHT15-1/2�W x 13�H x 12�D; 32 lbs.
¨
The TX50D is covered with a durable Tolexmaterial. To keep the cabinet in top
condition, wipe it clean with a damp, lint-free cloth to remove dirt and road film.
Never spray cleaning agents directly onto the cabinet, and stay away from abra-
sive cleansers which could damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason,
the specifications and information in this manual are subject to change without notice.
www.crateamps.com
?2000 SLM Electronics Y A division of St. Louis Music
1400 Ferguson Avenue Y St. Louis, MO 63133
P/N 47-099-01 Y 03/00 |
ACEC
