10 electrolux cold
The manufacturer declines any liabili-sounds and the alarm signal lamp
ty should these safety measures notflashes.
be observed.The acoustic alarm signal sound and the
red alarm signal lights up:
Electrical Requirements
Press the button to stop the acoustic
Before switching on, make sure the elec-
alarm signal. The red alarm lamp
tricity supply voltage is the same as that
continues to flash until the freezer
indicated on the appliance rating plate.
reaches the proper temperature.
The appliance is supplied with a 13amp
on putting the equipment into service
plug fitted. In the event of having to
until the temperature necessary for
change the fuse in the plug supplied, a
safe food storage is maintained.
13amp ASTA approved (BS1362) fuse
after loading fresh food in a quantity
must be used.Should the plug need to
exceeding the freezing capacity (see
be replaced for any reason. The wires in
"Freezing")
the mains lead are coloured in accor-
if the lid remains open for long time.
dance with the following code:
If there is a malfunction and the internol
Green and Yellow: Earthtemperature cannot be maintained.
Blue:NeutralThe acoustic alarm signal fails to sound
and the red alarm indicator fails to light
Brown:Live
up:
The wire coloured green and yellow must
if the power supply to the equipment
be connected to the terminal marked
fails
with the letter "E" or by the earth symbol in the case that the electronic temper-
or coloured green and yellow. ature controller has failed.
The wire coloured blue must be connect-
Prior to putting into service
ed to the terminal "N" or coloured black.
The wire coloured brown must be con- Clean the inside of equipment and all the appli-
ances prior to putting into service the first time
nected to the terminal marked "L" or
coloured red.(see chapter: "Maintenance")
Adjusting the temperature Upon completion there must be no cut,
or stray strands of wire present and thesetting
cord clamp must be secure over the Use a coin to turn the temperature control
outer sheath.knob. This is to render it more difficult to
change the setting inadvertently (protection
How to use
against children`being able to tamper with
Temperature alarmthe equipment).
If the temperature in the freezerPosition "Off" means that the equip-
becomes too high, the acoustic alarmment is switched off. |
ACEC
