125992312 gb.qxp 2004-07-03 15:59 Page 8
6 Start/Pause button ?Filter cleaning? light
Press this button to start the dryer after havingThis light illuminates at the end of the programme to
selected the programme and the options.remind you that the filters must be cleaned.
The relevant light will stop flashing. If you have
chosen a delayed start, the machine will begin the?Water reservoir full? light
countdown.This light comes on at the end of the programme to
If the door of the appliance or the small door atremind you that the water reservoir must be emptied
the bottom is opened while the programme isout. If this light illuminates during a programme this
running, this button must be pressed again aftermeans that the water reservoir is full. The buzzer
closing the door in order to restart the programmesounds, the programme stops, the light of the
from the point at which it was interrupted.Start/Pause button flashes.
This button must be depressed also after a power
failure and after having re-inserted the water?Condenser cleaning? light
reservoir, if it has been emptied in the middle of aIt comes on every 80 cycles to remind you that the
programme after lighting up of light .
In both cases the light of the Start/Pause buttoncondenser must be cleaned.
flashes to remind you that the start button needs to
be pressed again.
8 Programme/Time selector dial
Allows you to select electronically controlled or time
7 Indicator lightscontrolled drying.
These lights indicate the following functions:Turn the dial to the required programme or time.
?Drying? light Electronically controlled drying
This light indicates that the appliance is in the drying(automatic)
phase.The appliance runs these programmes with the help
of probes which detect the degree of dampness of
?Cooling? light the laundry.
This light indicates that the appliance is in theSimply select the programme according to the type
cooling phase. At the end of drying, there is aof laundry and degree of drying required.
10 minute cooling phase to cool the laundry.
Time controlled drying
Can be used to finish off drying if necessary.
?End of programme? light Select the 90 or 60 minute programme for cottons
This light is on at the end of the cooling phase,
during the anti-creasing phase and at the end of theor the 30 minute programme for synthetics.
programme.To cancel a programme which is running, turn the
programme selector dial to ?0?.
At the end of drying, turn the selector dial to ?0? to
switch the machine off before removing the laundry.
8 |
ACEC
