TROUBLESHOOTING (continued)
Actions to Correct Abnormal Displays
Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the
adjustments suggested below. (only for RGB2)
ENGLISH
Text displayed across the screen appears vertically streaked, with some characters blurred (figure 1).
Symptom 1
The display image appears flowing (figure 2) (RGB input).
VerticalBefore adjustment
Figure 1streaksSome characters
are blurred.
ABCDEFGHIJAfter adjustment
abcdefgABCDEFGabcdABCBABCAll characters appearcrisp now.
ABCDEFGHIJ
ExampleabcdefgABCDEFGabcd
After adjustment
ABCABCAll characters areblurred.
1) Press the AUTO button on the remote control.
When adjustment is not possible with Auto Adjust
2) Press the MENU button. The Main Menu will be displayed.
Adjustment3) Press the SELECT button and select Setup.
procedure4) Press the OK button. The Setup Menu will be displayed.
5) Press the SELECT button and select Horizontal Clock.
(Display fine patterns as characters or a vertical striped pattern over the entire screen during Horizontal Clock adjustment.)
6) Press the or ADJUST buttons and search for clear characters over the entire screen.
7) Perform adjustment for symptom 2 below, when the characters are blurred on the entire screen.
� The display image may be momentarily disturbed during clock adjustment but this is not a failure.
Text displayed across the screen appears blurred in its entirety (figure 2).
Symptom 2
A fine pattern flickers when displayed on the screen (figure 3).
Before adjustmentFigure 3Before adjustment
Figure 2
ABCDEFGHIJ
abcdefgABCDEFGabcd
ABCABC
ABCDEFGHIJ
abcdefgABCDEFGabcd
Example
After adjustmentAfter adjustment
ABC
1) Press the AUTO button on the remote control.
When adjustment is not possible with Auto Adjust
2) Press the MENU button. The Main Menu will be displayed.
3) Press the SELECT button and select Setup.
Adjustment
procedure4) Press the OK button. The Setup Menu will be displayed.
5) Press the SELECT button and select Clock Phase.
(Display fine patterns as characters or a vertical striped pattern over the entire screen during Clock Phase adjustment.)
6) Press or ADJUST buttons to make the text appear6) Press or ADJUST buttons to make the text appear
clean across the screen.without flickering. |
ACEC
