DS40, 50, 60, 75, 96 OM 7/14/98 1:37 PM Page 3
Specifications
JBL Decade Series
DS40DS50DS60DS75DS96
Type:4" 2-Way5-1/4" 2-Way6-1/2" 2-Way5" x 7"/6" x 8" 2-Way6" x 9" 3-Way
Speaker Impedance:4 ohms4 ohms4 ohms4 ohms4 ohms
Recommended
Amplifier Power Range:5 � 50 watts5 � 60 watts5 � 75 watts5 � 100 watts5 � 100 watts
Frequency Response:100Hz ~ 20kHz75Hz ~ 20kHz65Hz ~ 20kHz50Hz ~ 20kHz45Hz ~ 20kHz
Sensitivity
A Note on Power Handling(@ 2.83V, 1 meter):91dB 92dB92dB93dB 93dB
JBL Decade Series speakers are
designed to produce reasonable volumeMounting Depth, Drop-in:1-11/16" (43mm)1-3/4" (45mm)1-13/16" (47mm) 2-3/16" (56mm) 2-15/16" (75mm)
levels with little amplifier power.Cut-Out Diameter:3-13/16" (97mm)4-5/8" (118mm)5-1/16" (129mm)5" x 7-3/16" 6-1/16" x 8-3/4"
However, the addition of an amplifier to(127mm x 183mm)(154mm x 223mm)
drive your speakers and a subwoofer
will enhance the dynamic range of your
system, and help overcome the ambient
noise in a moving vehicle. These speak-
ers are designed to handle the power of
a dedicated amplifier driven at or below
its rated power. If an amplifier is driven
far above its rated power, the output
signal will Oclip,� and the additional
power present in a clipped signal can
damage any speaker. Distorted or
Ofuzzy� sound from your speakers is an
indication that the amplifier has exceed-
ed its rated power, and you should
reduce the volume level.
General Care
The loudspeaker grilles may be cleaned
with a slightly damp cloth. Do not use
any cleaners or solvents on the grilles or
the speaker cones.
3 |