HV-29JH24/29JH54/29JH74/29VH14/29VH54 / GGT0056-001A-H / English
04_Eng.book.fm Page 28 Friday, August 6, 2004 2:00 PM
Using the TV?s menu
2 Press the DISPLAY button to display ?Additional preparation? on page 35.
?ID NO.? (ID number input screen).This Television is compatible with the
Progressive video signal (525P signal
and 625P signal) only when the
component video signal is input.
? PIP
3 Press the number buttons to enter the [Except HV-29JH24/HV-29VH14]
ID number.You can enter the Twin or PIP mode from
The lock is temporarily released so you the menu without using the remote control.
can view the TV channel.This menu will be useful if you cannot find
If you have forgotten the ID number:the remote control around you.
Perform step 1 of ?To set this function:? on ? For detailed description of Twin and
PIP mode, see ?Twin and PIP (picture
page 27. After confirming the ID number,
press the TV/VIDEO button to exit the menu.in picture) function? on page 15.
1 Choose PIP, then press the MENU/OK
? When you would like to cancel the
CHANNEL GUARD function, you must button.
perform the operation ?To set this
function? again.
? AUTO SHUTOFF
You can set your TV to turn off if no signal is
received for about 15 minutes or longer
after the end of a broadcast.2 Display Twin or PIP picture as you like.
First press the 6 button to choose an
ON:item listed, then press the 5 button to
This function is turned on.
choose one of options, then press the
OFF:MENU/OK button.
This function is turned off.PIP/TWIN
? The AUTO SHUTOFF function does Each time you press the 5 button, the
not turn off the TV?s main power.screen mode changes as follows:
? The AUTO SHUTOFF will not work for
TWIN PIP OFF (normal screen)
a VIDEO mode.
? VIDEO-3 SETTINGSUB INPUT
Set the VIDEO-3 SETTING correctly Each time you press the 5 button, the
according to the video signal input from the input source of the sub picture changes as
follows:
external device connected to the VIDEO-3
terminal. If this setting is incorrect, images VIDEO-1 VIDEO-2 VIDEO-3
will not be displayed.TV VIDEO-4
VIDEO:SWAP
If a normal video signal (composite video Each time you press the MENU/OK button,
signal) is input.the main picture and the sub picture will be
swapped.
COMPONENT:
If a Component video signal (Y/CB/CR ? If PIP/TWIN is selected OFF, then
SUB INPUT and SWAP disappears in
signals) is input.PIP menu.
? For detailed connecting methods, see
28 |
ACEC
