Setup Menu
INPUT SELECT MENU Screen
The following table identifies and describes the parameters that may be set using the INPUT SELECT MENU screen.
Top half: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]: Default setting
ParameterPossible settingsDescription
INPUT SELECT[LINE]This parameter is used to select the audio and video input signals.
Y/CLINE : The composite video signal from the VIDEO LINE IN terminal and the analog
DVaudio signals from the AUDIO IN terminals are to be used.
Y/C : The YC separate signal from the Y/C IN terminal and the analog audio signals
from the AUDIO IN terminals are to be used.
INPUT[LINE]DV: The digital video and audio signals from the DV IN/OUT terminal are to be used.
YC* The front-panel indicator corresponding to the type of input signal selected on this
dVscreen will light up or start to flash.
Setting of this parameter will not be possible when REMOTE SELECT from the
REMOTE MENU screen has been set to DV(SLAVE), or DV(TRIGGER). DV signals
will be used for input at these times
MENUThis button is used to return to the Setup Menu screen.
MENU
SYSTEM MENU Screen
The following table identifies and describes the parameters that may be set using the SYSTEM MENU screen.
Top half: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]: Default setting
SYSTEM MENU (1/2) screen
ParameterPossible settingsDescription
SETUPOFFThis parameter is used to indicate whether or not a setup signal is to be added to analog
[ON]video (i.e., composite or YC separate) during the recording process. The actual setting depends
on whether the input analog signal contains a setup signal. (NTSC ouly)
OFF : This setting should be made when the input analog signal does not contain
SETUPoFFa setup signal.
[oN]ON: This setting should be made when the input analog signal contains a setup signal.
TEST SIGNAL[OFF]This parameter is used to indicate whether or not the color bar output by the DVD
ONrecorderOs internal signal generator is to be displayed.
OFF : The color bar is not displayed and video from the VIDEO LINE IN terminal is
TEST S[oFF]output to the monitor.
oNON: The color bar is displayed. Use this setting when the color bar is to be recorded.
FACTORY[CANCEL]This parameter is used to indicate whether or not all setup menu parameters are to
SETTINGEXECUTEbe returned to their default settings.
CANCEL : Default settings are not to be restored.
FACTRY[CAN]EXECUTE : Default settings are to be restored. However, the current set values for
EXEthe TV TYPE item on the SYSTEM MENU (2/2) screen will not be erased.
Note
The system must be restarted after this parameter is changed.
KEYBOARD[ENGLISH]This parameter is set when using a USB keyboard, and its purpose is to indicate the
STYLEFRENCHkeyboardOs layout (or language) as one of the following.
ITALIANENGLISH
GERMANFRENCH
SPANISHITALIAN
JAPANESEGERMAN
SPANISH
KboARd[ENG]JAPANESE
FRNNote
ITLThe system must be restarted after this parameter is changed.
GER
ESP
JPN
62
11_BD-X201M(58_75).p656205.1.14, 4:37 PM |
ACEC
