RX-6030VBK
SECTION 2
Disassembly method
2.1 Removing the top cover
(See Fig.1)
(1) From the right and left sides of the main body, remove the
four screws A attaching the top cover.B2
(2) From the back side of the main body, remove the threeTop cover
screws B attaching the top cover.
(3) Remove the top cover in the direction of the arrow 2 while
extending the lower sections of the top cover in the direc-
1
tion of the arrow 1.
1
A
A
Fig.1
2.2 Removing the front panel assembly
(See Figs.2 and 3)
? Prior to performing the following procedure, remove the top
Front panel assembly Card wire
cover.CN201
(1) Disconnect the card wire from the connector CN402 on theCCC
audio board. (See Fig.2)
(2) Disconnect the card wire from the connector CN201 on the
power supply board. (See Fig.2)
Tie band
(3) Remove the tie band and wire protection board fixing the
card wire. (See Fig.2)
Wire
(4) Remove the three screws C attaching the front panel as-Power
protection
sembly. (See Fig.2)boardsupply
(5) From the bottom side of the main body, remove the fourboard
screws D attaching the front panel assembly. (See Fig.3)Card
(6) Remove the front panel assembly in the direction of the ar-wire
row. (See Fig.3)
CN402
Audio
board
Fig.2
Front panel assembly
DD
Fig.3
1-4 (No.22026) |
ACEC
