FS-X3(A)_E.book Page 19 Friday, March 28, 2003 2:57 PM
Using External Equipments
Recording the System?s Source Adjusting the Input Level
to External Equipment
If the sound from the component connected to the LINE IN
You can record the System?s source to external equipmentjacks is too loud or is not loud enough when changing the
which is connected to the LINE OUT or OPTICAL DIGI-source to the external component (without adjusting the
TAL OUT terminal of the System, such as tape deck or MDvolume level), you can change the input level through the
recorder, etc.LINE IN jacks.
Q First make sure that the external equipment is properly On the Remote Control
connected to the System. (See page 8).
Q When recording an FM or AM program, use the LINE 1When the source is ?LINE?, press and
OUT terminal (not the OPTICAL DIGITAL OUT termi-hold the SET button.
nal).
1Play the System?s CD Player or tune in
to a station.
Q The recording level is not affected by the VOLUME level If you have changed the source name of the external
set by the System. Also it is not affected by the sound ef-component, the currently selected source will appear
fects.(see page 18).
2Press the 3 or 2 button to select an
For operation of the external equipment, refer to its In-appropriate input level.
structions. Each time you press the button, the input level alter-
nate between ?INPUT LEVEL1? and ?INPUT
LEVEL2?.
INPUT LEVEL1: Select this when the sound is not loud
enough.
INPUT LEVEL2: Select this when the sound is too loud.
3Press the SET button to finish the
adjustment.
?LEVEL2 STORED? appears on the display.
The selected input level will be kept in memory until
you change it.
The input level is too high.
Select ?INPUT LEVEL2? if the current level is ?INPUT
LEVEL1?.
If the current level is ?INPUT LEVEL2?, adjust the output
level on the external component.
19 |
ACEC
