PLAYBACK Basic Connections
36 EN
There are three basic types of connections. When making
the connections, refer also to your VCR and TV
instruction manuals.
Connection To A VCR A
(Editing, Dubbing and Playback)
When connecting
the cables, openNOTE:
the jack cover.Use the optional Audio and Video cables.
To AUDIO and
VIDEO OUTCONNECT CAMCORDER TO VCR
connectors
As shown in the illustration to the left, connect the
Audio and1Audio and Video cables between the AUDIO and
Video cablesVIDEO OUT connectors on the camcorder and
(provided)those on the VCR.
SUPPLY POWER
To
AUDIO andTurn on the camcorder, the VCR and the TV.
If your TV/VCR
VIDEO IN2
has the SCART
connectors
connector, use
SELECT MODE
the cable adapter.
Set the VCR to its AUX input mode, and set the TV
(optional)
3to its VIDEO mode.
VCR
Connection To A TV With A/V Input
AntennaConnectors B (Playback ONLY)
NOTE:
Use the optional Audio and Video cables.
CONNECT CAMCORDER TO TV
RF unitAs shown in the illustration to the left, connect the
RF-V5E1Audio and Video cables between the AUDIO and
(optional)VIDEO OUT connectors on the camcorder and
those on the TV.
To AUDIO, VIDEO andSELECT MODE
RF DC OUT connectorsSet the TV to its VIDEO or AV mode (as specified in
2its instructions).
NOTES:
cIt is recommended to use the AC PowerConnection To A TV With NO A/V Input
Adapter/Charger as the power supply instead
Connectors (Playback ONLY)
of the battery pack.
cTo monitor the picture and sound from the
NOTE:
camcorder without inserting a tape, set the
Use the optional RF-V5E RF unit.camcorderOs Power Switch to OCAMERA�,
then set your TV to the appropriate input
*Refer to the RF-V5E instruction manual for connection
mode.
procedure.
cIf you have a TV or speakers that are not
specially shielded, do not place the speakers
adjacent to the TV as interference will occur
in the camcorder playback picture. |
ACEC
