11
Viewfinder AdjustmentSP-EP recording mode and
T20Y30Y40 tape length select button
POSITION VIEWFINDER
Adjust the viewfinder manually for best viewability
1(see illustration at left).
SELECT MODE
Set the power switch to CAMERA.
2
ADJUST DIOPTER
Turn the diopter adjustment control until the
3indications in the viewfinder are clearly focused.
Tape Length/Recording Mode Setting
SET TAPE LENGTH
Set the tape length button according to the length of
1the tape used. T20 = 20 minutes of recording time,
T30 = 30 minutes, and T40 = 40 minutes (in SP).
SET RECORDING MODE
Set POWER to OCAMERA�.
Set depending on your preference. OSP� (Standard
2Play) provides higher picture and sound quality and
Tape length and recordingis better for dubbing, while OEP� (Extended Play) is
more economical, recording at 1/3 the speed of SP.
mode indicator
T30 SPT20 SPT20 EP
Loading/Unloading A Cassette
T40 EPT30 SP
OPEN CASSETTE HOLDER
T40 SPT30 EPSlide EJECT until holder opens. Do not use force to
1open.
INSERT/REMOVE CASSETTE
Make sure label is facing outward.
2
CLOSE CASSETTE HOLDER
Press PUSH and make sure the holder is closed and
3locked.
NOTES:
cA cassette holder canOt be opened unless a power
supply is attached.
cMake sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
Turn to take upslack.
slack.cMake sure the Erase Protection tab is present. If not,
cover the hole with adhesive tape. (Some cassettes
have sliding tabs � in this case, check the tabOs
Erase ProtectionGearposition.) |
ACEC
