MasterPage: Left
GR-D350AG_EN.book Page 20 Wednesday, December 28, 2005 8:24 AM
VIDEO PLAYBACK
20 EN
2) To resume normal playback, press 6.
Normal PlaybackI During playback, press and hold ! or 1. The
search continues as long as you hold the button.
!
VOL. +/�Once you release the button, normal playback
6Lock Buttonresumes.
1I A slight mosaic effect appears on the display
during Shuttle Search. This is not a malfunction.
Speaker
ATTENTION:
During Shuttle Search, parts
of the picture may not be
MENU
clearly visible, particularly on
the left side of the screen.7
1Load a cassette. ( pg. 16)
2Set the Power Switch to OPLAY� while
pressing down the Lock Button located on the Blank Search
switch.
Helps you Ţnd where you should start recording
3To start playback, press 6.in the middle of a tape to avoid time code
4To stop playback, press 7.interruption. ( pg. 19)
I During Stop mode, press 1 to rewind, or ! to
1Load a cassette. ( pg. 16)
fast-forward the tape.
2Set the Power Switch to OPLAY� while
To control the speaker volume
pressing down the Lock Button located on the
Slide the Power Zoom Lever (VOL. +/�) towards
switch.
O+� to turn up the volume, or towards O�� to turn
down the volume.3Press BLANK.
I The OBLANK SEARCH� indication appears and
NOTES:the camcorder automatically starts reverse or
I The playback picture can be viewed in the LCD
forward search, then stops at the spot which is
monitor, viewŢnder or on a connected TV.
about 3 seconds of tape before the beginning of
( pg. 21)the detected blank portion.
I If Stop mode continues for 5 minutes when power
I To cancel Blank Search midway, press 7.
is supplied from a battery and no operation
(example: zooming is performed), the camcorder NOTES:
shuts off automatically. To turn on again, set the I Before starting Blank Search, if the current
Power Switch to OOFF�, then to OPLAY�.position is at a blank portion, the camcorder
I When a cable is connected to the AV connector, searches in the reverse direction. If the current
the sound is not heard from the speaker.position is at a recorded portion, the camcorder
searches in the forward direction.
Still Playback
I If the beginning or end of the tape is reached
Pauses during video playback.during Blank Search, the camcorder stops
automatically.
1) Press 6 during playback.
2) To resume normal playback, press 6 again.I A blank portion which is shorter than 5 seconds of
tape may not be detected.
I If still playback continues for more than about
I The detected blank portion may be located
3 minutes, the camcorderOs Stop mode is between recorded scenes. Before you start
automatically engaged.
recording, make sure there is no recorded scene
Shuttle Searchafter the blank portion.
Allows high-speed search in either direction Playback Snapshot
during video playback.
This camcorder allows you to take snapshots
1) During playback, press ! for forward during video playback.
search, or 1 for reverse search.
Press SNAPSHOT. |