SYSTEMPRIORITY
O SYSTEM� functions which are set when the Power[LCD]: When the LCD monitor is fully open, even if
Switch u is set to O � are also applied when thethe viewfinder is pulled out, the image is displayed
Power Switch u is set to OPLAY� ( pg. 31).only on the LCD monitor; it will not be displayed in the
viewfinder.
STYS EMFINDER: When the viewfinder is pulled out, even if
BEEP� MELODY
TALLY� ONthe LCD monitor is fully open, the image is displayed
REMOTE� ONonly in the viewfinder; it will not be displayed on the
DEMO MODE � ON
PRIORITY � LCDLCD monitor.
CAM RESET
CAM RESET
[RETURN]: Does not reset all settings to the
RETURNfactory-preset.
EXECUTE: Resets all settings to the factory-preset.
BEEP
CAMERA DISPLAY
OFF: Even though not heard while shooting, shutter
sound is recorded on the tape.Y Settings made in the O CAMERA DISPLAY� Menu
are effective only for video shooting.
BEEP: The beep sounds when the power is turned on
Y Settings made in the O CAMERA DISPLAY� Menu
or off, and at the beginning and end of recording. Also
remain effective even when the Power Switch u is set
to activate the shutter sound effect ( pg. 17, 25).
to O �. However, the menu settings can be changed
[MELODY]: Instead of a beep, a melody soundsonly when the Power Switch u is set to O �.
when any operation is performed. It also activates the
shutter sound effect ( pg. 17, 25).CDAMERAISPLAY
BRIGHT
TALLYON SCREEN �LCD/TV
DATE/TIME �AOUT
OFF: The tally lamp remains off at all times.TIME CODE �OFF
CLOCK25.12.03
[ON]: The tally lamp comes on to signal the start ofADJ .17:30
recording.
REMOTERETURN
OFF: Disables the camcorder from receiving the
remote control's beam signals. The camcorder cannot
BRIGHT
be operated by the remote control.
pg. 12, OTo Adjust The Brightness Of The Display�
[ON]: Enables the camcorder to receive the remote
controlOs beam signals.ON SCREEN
DEMO MODELCD: Keeps the camcorderOs display (except the date,
time and time code) from appearing on the connected
OFF: Automatic demonstration will not take place.
TV screen.
[ON]: Demonstrates certain functions such as
[LCD/TV]: Makes the camcorderOs display appear on
Programme AE with special effects, etc., and can be
screen when the camcorder is connected to a TV.
used to confirm how these functions operate.
Demonstration starts in the following cases:DATE/TIME
Y When the Menu Screen is closed after ODEMOOFF: The date/time does not appear.
MODE� is turned OON�.
[AUTO]: Displays the date/time for approx. 5
Y With ODEMO MODE� set to OON�, if there is no
seconds in the following cases:
operation for about 3 minutes after the Power
Switch u is set to O � or O � .Y When the Power Switch u is set from OOFF
(CHARGE)� to O � or O �.
Performing any operation during the demonstration
Y When tape playback starts. The camcorder displays
stops the demonstration temporarily. If no operation is
the date/time when scenes are recorded.
performed for more than 3 minutes after that, the
Y When the date is changed during tape playback.
demonstration will resume.
ON: The date/time is always displayed.
NOTES:
Y The date indication can also be turned on/off by
I If a tape is in the camcorder, the demonstration cannot bepressing the DISPLAY Button ; on the remote
turned on.control.
I ODEMO MODE� remains OON� even if the camcorder
power is turned off.
I If ODEMO MODE� remains OON�, some functions will not[ ] = Factory-preset
be available. After viewing demo, set to OOFF�.
EN
30USING MENUS FOR DETAILED ADJUSTMENT
1 GR-D90/70A EN 23-343003.2.4, 17:07 |
ACEC
