SYSTEM CONNECTIONS
48 EN
[A]Using PC connection cable
To PC
(DIGITALPC connection
PHOTO)cable (optional)To RS-232C
ORPC
[B]Using DV cable
Power Switch
Core filterCore filter
To DVDV cableTo DV
IN/OUT(optional)connector
PC with DV
connector
NOTES:
Connection To A Personal Computer
IIn order to maintain optimum performance of the
[A] Using PC connection cablecamcorder, provided cables may be equipped with
This camcorder can transfer still images to a PC byone or more core filter. If a cable has only one core
using the software (optional).filter, the end that is closest to the filter should be
connected to the camcorder.
[B] Using DV cable
IIt is recommended to use the AC Adapter as the
It is also possible to transfer still images to a PC with
power supply instead of the battery pack
a DV connector by using software equipped with the
( pg. 8).
PC or commercially available software.
INever connect the PC connection cable and the
DV cable simultaneously to the camcorder.
Make sure the camcorder and PC are turned off.
Connect only the cable you wish to use to the
1
camcorder.
IThe date/time information cannot be captured into
Connect the camcorder to your PC using the
the PC.
2appropriate cable as shown in the illustration.
IRefer to the instruction manuals of the PC and
Software.
Turn the camcorderOs Power Switch to O�
IThe still images can also be transferred to a PC
3while pressing down the Lock Button located on
with a DV connector-equipped capture board.
the switch and turn on the PC.
IWhen using a DV cable, be sure to use the
YRefer to the instruction manual of the software
optional JVC VC-VDV206U or VC-VDV204U DV
on how to transfer a still image to the PC.
cable depending on the type of DV connector (4
or 6 pins) on the PC, or use the DV cable providedWhen finished, turn off the PC first, then the
4camcorder.with the capture board.
IThe system may not work properly depending on
the PC or capture board you are using. |
ACEC
