USER MAINTENANCE
EN77
After UseCleaning The Camcorder
Turn off the camcorder.To clean the exterior, wipe gently with a soft
11cloth.
Put the cloth in diluted mild soap and wring it
Slide and hold OPEN/EJECT in the direction ofwell to wipe off heavy dirt. Then wipe again
2the arrow, then pull the cassette holder coverwith a dry cloth.
open until it locks. The cassette holder opens
automatically. Remove the cassette.Press PUSH-OPEN and open the LCD monitor.
2Wipe gently with a soft cloth. Be careful not to
Press OPUSH HERE� to close the cassette holder.damage the monitor. Close the LCD monitor.
3YOnce the cassette holder is closed, it recedes
automatically. Wait until it recedes completelyTo clean the lens, blow it with a blower brush,
before closing the cassette holder cover.3then wipe gently with lens cleaning paper.
Tilt the viewfinder upward 1. Slide BATT.To clean the viewfinder, raise it to the vertical
4RELEASE 2 and remove the battery pack 3 .4position. Open the viewfinder cleaning hatch in
the direction of the arrow 1 .
Insert a lens blower or soft cloth into the gap at
5the bottom of the viewfinder and clean the
interior of the viewfinder with it 2 .
Close the hatch. Tilt the viewfinder back to the
6horizontal position.
Remove.
NOTES:
Cassette
PUSH HEREIAvoid using strong cleaning agents such as benzine
holder
or alcohol.
ICleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
IMold may form if the lens is left dirty.
IWhen using a cleaner or chemically treated cloth
refer to the cautions of each product.
Cassette holder
cover
OPEN/EJECT Switch
BATT. RELEASE Switch
1
2
Hatch21Lens blower
3 |
ACEC
