WARNINGCAUTION
Fixed Polarized Screen and Screen StandFixed Polarized Screen
English
Never modify the screen. Otherwise, the damageDo not hang on or hock anything on the screen.
of the unit and injury can result.Drop or fall can result in injury.
Install all bolts and nuts on the product properly.Do not install the unit in a place where it is
Otherwise, the damage of the unit and injury canexposed to direct sunlight, high heat or humidity,
result.or dust accumulates.
Fixed Polarized ScreenDo not touch the screen surface or write letters
or draw pictures on the screen. Ink and paints
on the screen cannot be wiped off.
If the wall on which the product is installed has an
insufficient strength, or if it is not installed
correctly, it may fall and cause injury or failure.
The wall must support a mass of 200kg.ContactWipe off dust from the screen surface using a
your dealer before installation.dry cloth or a soft brush. Do not use benzine or
thinner. Otherwise, the screen may be
damaged.
Screen Stand
If the screen is tarred or oiled, wipe it off with a
Do not ride on the product. Motion and fall cansoft cloth moistened with a neutral detergent.
result in injury.
Screen Stand
Do not place heavy objects, or articles other
than the determined objects, on top of the
screen because this may disturb the balance
and cause the screen to fall and becomeCAUTION
damaged.
Fixed Polarized Screen and Screen Stand
After installation, secure the double-wheel
The screen itself weighs 20kg (mass) and has acaster stoppers. Otherwise, the damage of the
unit and injury can result.
size of 2.082m x 1.574m; therefore, it is
recommended that two persons perform the
Do not attempt to move the screen with the two-
wheel casters locked because this may result in
Do not install the product on a tilted or unstabledamage to the floor, the casters or the screen.
surface or in places where it is subject to vibration
or shock. Drop or fall can result in injury.
Firmly insert the height adjustment stopper
handle into the hole in the slide pipe and make
sure the slide pipe is locked before using;
otherwise, tilting of the screen, injury or damage
to the screen may result.
Adjust the heights of the left and right side slide
pipes so that screen height is the same on the
left and right sides to prevent stressing the
screen. Stress can result in damage to the
equipment.
� 3 � |
ACEC
