Important items
CD-224M/DPF-J5010 (En)
30
CleaningPeriodic inspection
Do not use volatile solvents such as alcohol, paint thinner, gasoline,This unit incorporates an optical pickup which is a precision device.
or benzine, etc. to clean the cabinet. Use a clean dry cloth.It is recommended to have this unit inspected periodically to clear
the pickup after about 1000 hours of use, although this period may
Do not use contact cleaners because it could cause a malfunction.vary depending on the installation condition (temperature, humidity,
Be specially careful against contact cleaners containing oil, for theydust, smoke, etc.) of the unit.
may deform the plastic components.
The unit has inspected, please consult your dealer or a KENWOOD
service center in your area.
Caution on condensationNote related to transportation and movement
Condensation (of dew) may occur inside the unit when there is aBefore transporting or moving this unit, carry out the following op-
great difference in temperature between this unit and the outside.eration:
This unit may not function properly if condensation occurs. In this
case, leave the unit for a few hours with the power left ON, and1. Remove all discs from the carousel and close the door panel.
restart the operation after the condensation has dried up.2. Confirm that the flashing ONO DISC� display has changed to steady
lighting, and then switch off the power.
Be specially cautious against condensation in a following cir-
cumstance:
NO DCI S
When this unit is carried from a place to another across a large differ-3. Wait a few seconds, then disconnect the power plug.
ence in temperature, when the humidity in the room where this unit
is installed increases, etc.
Memory backup function
Stored contents for at leastPower status (ON or OFF),
3 weeks after power plug isTitle name registration contents
unplugged from the AC out-Music type registration contents
let.Best selection registration contents |