Connecting to Other DevicesConnecting to Other Devices
Make connections as shown below.
When connecting the related system components, refer also to the instruction manuals of the related components.
6
Do not plug in the power lead until all connections are completed.
DIGITAL OUT jack (OPTICAL)
Digital component (MD,DAT, etc.)
Remove the protective cap before using the DIGITAL OUT jack.
DIGITAL OUT
OPTICAL
TEXT
DIGITAL INPUT (OPTICAL)
Chapter 1Remove the cap
Optical digital cable
(Commercially-avaliable)
OUTPUT
RL
DIGITAL OUT
OPTICAL
TEXT
SYSTEM
Chapter 2CONTROL
SL16
TEXT
*1To wall AC
outlet
RS 232C
D-Sub 9 pin connector
Chapter 3
SystemCommu-Optical digital cable
controlnication(Commercially-avaliable)
cablecable
RS-232C cable OReverse type�
(Commercially-avaliable)
Chapter 4
SYSTEM TEXTOPTICAL
CONTROL
Connect a PC to use the
PC LINK function.
Chapter 5
CD
Audio cable
Receiver or Amplifier, etc.
* 1DTS Disclaimer clause
Note on the SL16 TEXT jackWhen playing DTS-encoded CDs, excessive noise will be ex-
hibited from the analog stereo outputs. To avoid possible
When using a KENWOOD Receiver equipped with the SL16 TEXT
Chapter 6
damage to the audio system, the consumer should take proper
jack, connect it to the Receiver using the communication cable
precautions when the analog stereo outputs of the CD playerprovided with this unit. This makes it possible to display the
is connected to an amplification system. To enjoy DTS Digital
disc and track titles on the LCD remote control unit (provided
Surrounda playback, an external 5.1 channel DTS Digital Sur-
with the Receiver).
rounda decoder system must be connected to the digital out-
put (S/P DIF, AES/EBU, or TosLink) of the CD player.
If your receiver has the SL16/XS8 mode select switch,
set the connected receiver to the [SL16] mode.
NoteNote
Chapter 71. Connect all cables firmly. If connections are loose, there could be loss of sound or noise produced.
NotesNotesNotes2. When plugging and unplugging connection cables, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cables without removal of the power cable can cause malfunctions or damage to the unit. |
ACEC
