Simple care
When dirty
0 Wipe with a dry, soft cloth.
If the unit is very dirty, moisten the cloth slightly and wipe off the dirt. Afterwards,
make sure you wipe the unit dry with a dry cloth.
Taking care of plugs etc.
0 Always keep the plugs of headphones etc. clean.
Dirty plugs can cause noise or failure of remote
control operation.
1. Do not use chemicals like benzine, thinner, etc., as they can cause
deterioration and discoloration.
2. Do not apply oil to the unit, for this will cause it to malfunction.
Beware of condensation
When water vapor comes into contact with the surface of cold material, water drops are produced.
If condensation occurs, correct operation may not be possible, or the unit may not function cor-
rectly.
This is not a malfunction, however, and the unit should be dried.
(To do this, turn the POWER switch ON and leave the unit as it is for several hours.)
Be especially careful in the following conditions:
When the unit is brought from a cold place to a warm place and there is a large temperature
difference.
When a heater starts operating.
When the unit is brought from an air-conditioned place to a place of high temperature with high
humidity.
When there is a large difference between the internal temperature of the unit and the ambient
temperature, or in conditions where condensation occurs easily.
US and foreign patents licensed from Dolby Laboratories Licensing Corporation |
ACEC
