33
Set Up functions
DV-505/DVF-R4050 (EN)
DVDDVD
Dynamic Range Digital Audio Out
PCM: Choose this setting for all connection
1Press Cursor up/down (5/ ) keys
scenarios, except the Dolby Digital or
on the remote to select Dynamic
DTS receiver or decoder connection.
Range on the set up menu dis-
Dolby Digital : Choose this setting if you connected
play, then press the ENTER key.
Dolby Digital receiver or decoder to
your DVD player.
MULTI CONTROLENTER
DTS: Choose this setting if you connected
DTS receiver or decoder to your DVD
player
For Europe and U.K.
(Dynamic Range menu appears.)
MPEG-2/DTS : Choose this setting if you connected
DTS receiver, decoder or MPEG audio
to your DVD player.
1Press Cursor up/down (5/ ) keys
on the remote to select Digital Au-
dio Out on the set up menu dis-
play, then press the ENTER key.
MULTI CONTROLENTER
Operations
(Digital Audio Out display appears.)
2 Press Cursor up/down (5/ ) keys
on the remote to select Dynamic
Range mode (on or off), then press
the ENTER key.
MULTI CONTROLENTER
÷ Press PLAY key to resume normal playback.
2Press Cursor up/down (5/ ) keys
on the remote to select specific
Digital Audio Out mode, then
press the ENTER key.
MULTI CONTROLENTER
DTS disclaimer clause
÷ Press PLAY key to resume normal playback.When playing DTS-encoded (CDs, DVDs), excessive noise
will be exhibited from the analog stereo outputs. To avoid
possible damage to the audio system, the consumer
NoteNote
should take proper pre-cautions when the analog stereo
outputs of the DVD player is connected to an amplifica-
When the DTS of Digital Audio Out or the Dolby
tion system. To enjoy DTS Digital Surrounda playback,
Digital setting and the format recorded on the disc
an external 5.1 channel DTS Digital Surrounda decoder
are different from each other, audio may not be put
system must be connected to the digital output (S/P DIF,
out. Please switch according to the indication on the
AES/EBU, or TosLink) of the DVD player.
disc. |
ACEC
