34
Set Up functions
DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)
DVDDVD
Dynamic Range Digital Audio Out
PCM : Choose this setting for all connection scenarios, ex-
1Press Cursor up/down (5/ ) keys on the remote
cept the Dolby Digital or DTS receiver or decoder con-
to select "Dynamic Range" on the set up menu dis-
nection.
play, then press the ENTER key.
Dolby Digital : Choose this setting if you connected Dolby
Digital receiver or decoder to your DVD player.
DTS : Choose this setting if you connected DTS receiver or
decoder to your DVD player
MULTI CONTROLENTER
For Europe and U.K.
MPEG/DTS : Choose this setting if you connected DTS re-
ceiver, decoder or MPEG audio to your DVD player.
(Dynamic Range menu appears.)
1Press Cursor up/down (5/ ) keys on the remote
to select "Digital Audio Out" on the set up menu
display, then press the ENTER key.
MULTI CONTROLENTER
(Digital Audio Out display appears.)
Operations
2Press Cursor up/down (5/ ) keys on the remote
to select Dynamic Range mode (on or off), then
press the ENTER key.
MULTI CONTROLENTER
2Press Cursor up/down (5/ ) keys on the remote
÷ Press 6 key to resume normal playback.to select specific Digital Audio Out mode, then
press the ENTER key.
MULTI CONTROLENTER
DTS disclaimer clause
When playing DTS-encoded (CDs, LDs, DVDs), excessive
noise will be exhibited from the analog stereo outputs. To÷ Press 6 key to resume normal playback.
avoid possible damage to the audio system, the consumer
should take proper precautions when the analog stereo outputs
NoteNote
of the DVD player is connected to an amplification system.
To enjoy DTS Digital Surrounda playback, an external 5.1When the DTS of Digital Audio Out or the Dolby Digital
channel DTS Digital Surrounda decoder system must besetting and the format recorded on the disc are different
connected to the digital output (S/P DIF, AES/EBU, orfrom each other, audio may not be put out. Please switch
TosLink) of the DVD player.according to the indication on the disc. |
ACEC
