aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
5.Song mode
Specifying the pitch of eachEditing a song
You can insert a new pattern into a song, or delete an existing
pattern
pattern. You can also add knob movements or your own per-
Pitch Offset�24...24formance to a song.
This function offsets the pitch of the pattern at the specifiedIf you wish to keep the edited song, you must perform
position within the song.the Write operation. If you select a different song or turn
off the power without performing the Write operation,
Pitch Offset simply offsets the pitch within the song. It
the song will return to the state in which it was before
does not affect the pitch data of the pattern itself.
you edited it.
1. If the song is playing, press the Stop/Cancel key to stop play-
back.
Inserting a pattern at a specified
2. Use the cursor keys to make the parameter select LEDs indi-
position (Insert Pattern)
cate Position.
3. Use the dial or Select keys to select the position whose pitchYou can insert a pattern at a specified position, and subsequent
you wish to offset.patterns will be moved backward (toward the end of the song).
4. Use the cursor keys to make the parameter select LEDs indi-
cate Pitch Offset.
5. Use the dial to specify the desired pitch offset. +/�1 offsetsInsert a new pattern at position 3
the pitch by a semitone, +/�2 by a whole tone, +/�7 by a fifth,
and +/�12 by one octave.Pattern A01Pattern B01Pattern D01Pattern A01Pattern B20Pattern B01
Before (16Steps)(36Steps)(32Steps)(16Steps)(24Steps)(36Steps)End
Even when the parameter select LEDs indicate Pitch Offset,insertingPosition1Position2Position3Position4Position5Position6Position7
you can use the Select keys to move the position forward or
backward in single steps.
3,5Pattern A01Pattern B01Pattern D01Pattern D01Pattern A01Pattern B20Pattern B01
After (16Steps)(36Steps)(32Steps)(32Steps)(16Steps)(24Steps)(36Steps)End
insertingPosition1Position2Position Position34Position5Position6Position7Position8
1. If the song is playing, press the Stop/Cancel key to stop play-
2,4back.
2. Hold down the Shift key and press step key 13 (Insert Pat-
3tern). (The 13 key will blink.)
3. The position indication in the display will blink. Rotate the
dial to select the position at which you wish to insert a pat-
tern. (For example if you wish to insert a pattern into posi-
tion 3. make the display blink "003.")
4. Press step key 13 once again, and a pattern will be inserted in
front of that position. (The key will go dark.)
To cancel, press the Stop/Cancel key.
The pattern that is inserted will be the pattern which had previ-
ously been at that position. Now you can specify the desired
pattern for the position that was inserted.
Data following the inserted pattern will be moved backward.
3
2,4
2
36 |
ACEC
