4. In the same manner, insert a roll5. Pull out some of the leader paper.Gently rotate the take-up spool as
of film in the upper compartment. AtInsert the tip of the leader paper intoshown in the photo until the start
that time, check that the film leaderthe slot of the lower Take-up Spool.mark on the leader paper is aligned
paper is set as shown in the photowith the start mark (A) on the spool
above. (The leader paper inside isclip.
facing outward on the pressure. plate* Correctly align the start marks
Note that the film direction is wrong ifwith each other, making sure that
the leader paper is facing inward.)the film feeds properly. When im-
proper feeding occurs, the proper
number of exposures may not be
taken.
* Avoid exposing the film to di-
rect sunlight when inserting or
removing film.
19 |
ACEC
