DM3000X/DM3002X
REAR PANEL FEATURES
4
107
53
2
653
1
98
1. Power Input - to plug your power plug in before switching on power. See safety precautions on page 3 for proper treatment of power.
2. Voltage Selector - Set this to the appropriate power for your location. If unsure ask your authorized dealer.
3. Phono Inputs - plug your turntables in here.
4. Ground lug - use these connections with your turntables? grounding cable to avoid signal hum.
5. Line Inputs - to connect stereo audio from HiFi VCRs, cassette and reel-to-reel tape decks, DAT machines, CD players, laser discs, tuners,
even synthesizers or other mixing consoles.
NOTE: Plug mono audio sources into both Left and Right inputs using a ?Y" cable connector.
6. Channel Process (DM3002X only) - The output is determined by pushing the front panel process selectors next to each channel. The post
fader signal is sent to the send output. The send should then be plugged into your external processor. Plug you processor return into the
Return input. Set the output level of you processor to match the signal it receives from the send to ensure smooth activation. With proper
level adjustment you can create smooth transitions between processed and unprocessed signal.
Note: this mixer was design to use one processor for many channels, If more than one channel is selected than the signal will bleed across
the channels. This can be a desired effect if you wish to blend wet a dry signal. Sent signal is captured after the PFL gain and prior to EQ
and Pan adjustments allowing the user total control of the processed signal.
7. Channel PFL Send - this output contains the PFL signal you hear in your headphones. The send should be plugged into your sampler and
the signal returned through one of your inputs.
8. Record Outputs - Plug in your tape deck to record your mix. Audio level is determined by the channel inputs.
9. Unbalanced Main Outputs - program output controlled by the Master fader knob.
10. Fader Start Connector (DM3002X only) - to attach your mixer to a remote start equipped Numark CD player using industry standard
1/8?(3.5mm) cables. The fader start is design to work with all digital pulse style industry standard CD players
- The Leader in DJ Technology
?2001 Industries- 8 -http://www.numark.com |
ACEC
